User's Manual

en | 63
02.2012Robert Bosch Car Multimedia GmbH
en
Monitor settings | Camera functions on the CCS | Navigation functions on the CCS
Settings in the main menu
1
st
Menu level Function
:
MON ON/OFF/
SYNC
Activate/deactivate/synchronise monitors in the cabin
Camera functions on the CCS
Note:
The following function is only
available if a camera is connected to
an appropriately configured driver's
monitor.
Function Action Note
Display the camera
image on the driver's
monitor
f Briefly press the
CAM button H
If more than one camera is connected, you can
switch through the images from the various
cameras by repeatedly pressing the CAM
button H.
When the last camera image is displayed, you
can return to the display of the current audio/
video source by pressing the CAM button H.
Navigation functions on the CCS
Notes:
f The following functions are only
available if a suitable navigation
system is connected.
f As long as the navigation system
is set as the source, the focus of
control will be set to the
navigation system and the
display will indicate “NAVI”.
You can control the navigation
system using the remote buttons
> and the ENTER button F.
If, during this time, you switch
the focus of control over to the
cockpit or cabin, the focus of
control will return automatically
to the navigation system approxi-
mately 10 seconds after your
last button press.
02_ProLine3_en.indd 63 23.02.12 18:36