User's Manual

Table Of Contents
(93,1)
[ Edit: 2017/ 5/ 8 Model: AIVINJ-N ]
ment within a certain range.
5GB0697X
INFO:
. You can also connect to the Nissan-
Connect
SM
Services Interactive Voice
Menu by touching the Voice Menu
button
on the map.
. After selecting [Call Nissan Assistance],
it may take some time until the system
initiates connection, depending on the
technical environment and whether
the TCU (Telematics Control Unit) is
being used by other services.
. To avoid disconnecting the line, do not
turn off the engine or the hybrid
system.
Message Box
AIVINJN1-D3B19AAA-3DC2-4413-A9B6-ABCF17B88AC1
Messages previously received from the
NissanConnect
SM
Data Center are dis-
played in the Message Box.
1. Push <MENU> and then touch [Info] on
the Launch Bar.
2. Touch [NissanConnect Services].
3. Touch [Message Box].
4. A message list is displayed. Touch
preferred message from the list.
Viewing message box:
In addition to messages, the Message Box
also stores information feeds.
1. Push <MENU> and then touch [Info] on
the Launch Bar.
2. Touch [NissanConnect Services].
3. Touch [Message Box]. A list screen is
displayed.
4. Touch a preferred folder. A list of
messages is displayed. The content is
announced by the system (Text-to-
Speech) while the vehicle is being
driven, or if parked, you can read the
content on the display.
INFO:
. Touch [Stop] during communication
with the NissanConnect
SM
Services
Data Center to cancel the connection.
. A message is displayed when the
communication is disconnected while
downloading information due to a
poor communication status. Select
[Yes] to restart the download.
. Laws in some jurisdictions may restrict
the use of “Text-to-Speech.” Check
local regulations before using this
feature.
. Some terminology such as personal
names, place names, special terms,
symbols, etc. may not be announced
correctly. This is not a malfunction.
. The system will pause announce-
ments when interrupted by the voice
guidance given by the navigation sys-
tem. When the voice guidance finishes,
the system will restart the announce-
ment.
. The volume can be adjusted when the
system announces the information.
“Volume and Beeps settings”
(page 2-19)
5. Information
Condition:
5-11