User's Manual

Table Of Contents
(172,1)
[ Edit: 2017/ 5/ 8 Model: AIVINJ-N ]
6. Navigation (if so equipped)
. The following may occur when the
route is displayed.
If you calculate a route on a main
road, the starting point of the route
may not exactly match the current
vehicle location.
The endpoint of the route may not
exactly match the destination.
If you calculate a route on a main
road, the system may display a
route from another main road. This
may be because the position of the
vehicle icon is not accurate. In this
case, park the vehicle in a safe
location and reset the vehicle icon,
or continue driving to see if the
position of the vehicle icon is auto-
matically adjusted before recalcu-
lating the route.
There are cases in which the system
shows an indirect route to reach
the destination or waypoints, if you
set them from stored or facility
information. In order to correct this,
you must be careful about the
traffic direction, especially when
lanes with different travel directions
are shown separately, such as inter-
changes and service areas.
This system makes no distinction
between limited traffic control and
total control (blockage). It may
show an indirect route even if the
road is usable.
Even if the ferry preference is set to
OFF, a route that uses a ferry line
may be suggested.
HOW TO UPDATE MAP DATA
GUID-12B14EED-F217-4681-BB6D-9C3DAFF9250C
Map data can be updated via USB or Wi-Fi
(late availability).
Updating with USB memory
GUID-038C70A5-969B-4B9E-9A5C-CBEDCE8A4B9B
The navigation map data can be updated
with the latest information by download-
ing a new map database to a USB memory
device and installing it in the vehicle.
1. Push <MENU> and then touch [Info] on
the HOME MENU Launch Bar.
2. Touch [System Information] and then
touch [Map Update].
5GB0748X
3. Touch [Update by USB device].
4. Touch [Save Map Information to USB]
5. Insert blank USB memory device in the
USB connection port.
“USB (Universal Serial Bus) Con-
nection Ports and AUX (auxiliary)
input jack” (page 2-4)
INFO:
The remaining data in the USB mem-
ory may be deleted.
6. Touch [Start].
7. Touch [OK] after saving the Map In-
formation to USB.
8. Access to the website (https://apps.
nissan.navshop.com/) with your per-
sonal computer. Download and install
the map update tool in your personal
computer. (first time only)
9. Download the updated data and store
it in the USB memory by the map
update tool.
10. Push <MENU> and then touch [Info] on
the HOME MENU Launch Bar.
11. Touch [System Information] and then
touch [Map Update].
12. Touch [Update by USB device].
Condition:
6-64