User's Manual

(134,1)
[ Edit: 2017/ 5/ 8 Model: AIVINJ-N ]
6. Navigation (if so equipped)
5GB0721X
4. Input the Intersection.
. Touch [State/Province] to enter the
state or province name if necessary.
. Touch [City] to enter the city name.
. Touch [1st Street] to enter the first
street name. After finishing the
entry, touch [List]. A list screen is
displayed. Select the desired street
name.
. After the first street information is
entered, touch [2nd Street] to enter
the second street name. After fin-
ishing the entry, touch [List]. A list
screen is displayed. Select the de-
sired street name.
5. These steps are covered as part of
step 4. No need to mention again
touch [OK]. The route is displayed.
6. Touch [Start] to start route guidance.
Voice command
1. Push <
> located on the steering
wheel.
2. After the tone sounds, speak a com-
mand.
Use the following voice command to set
an intersection as destination:
“Intersection”
SETTING BY PHONE NUMBER
AIVINJN1-87C28043-E7CD-4FB6-9E27-0811FF88248E
If the phone number of a facility is known,
it is possible to search for a facility by
entering the phone number.
INFO:
. If the area code of the specified tele-
phone number does not exist in the
map data, the system cannot search
for the location.
. Only the locations included in the
database in the map data can be
searched for by phone number. Resi-
dential phone numbers cannot be
used to search for a location.
1. Push <MAP>.
2. Touch [Destination] on the map
Launch Bar.
3. Touch [Phone Number]. The telephone
number input screen is displayed.
4. Enter the telephone number including
the area code. After finishing entry,
touch [OK].
5. The selected destination is displayed.
Touch [Start] after confirming the
location of the displayed destination.
INFO:
If there are more than one location
registered for the phone number, a list
screen is displayed. Touch an item on the
list to select a preferred location.
SETTING FROM STORED ROUTES
AIVINJN1-174315DE-CFE8-4311-94E7-67FE9F3D0C92
It is possible to select a preferred route
from the stored routes.
1. Push <MAP>.
2. Touch [Destination] on the map
Launch Bar.
3. Touch [Stored Routes]. A list screen is
displayed.
4. Touch the preferred route from the
list.
Condition:
6-26