Getting Started Guide

(31,1)
[ Edit: 2019/ 9/ 13 Model: 2020MY AIVI ST3 OM_N20E-AV1NJU0_NAVIOM19-022 ]
scription is active. Up to 7 devices can be
connected to the Wi-Fi hotspot.
INFO:
To use the Internet, a subscription with
the service provider is required in ad-
vance. Consult your cellular provider for
details.
1. Push <MENU> and touch
[Connections].
2. Touch [Wi-Fi].
3. Touch [Vehicle Hotspot]. Network
Name (SSID) and password will be
displayed.
4. Select the in-vehicle Network Name
(SSID) on your device.
5. Enter the network password on the
device to connect to the in-vehicle Wi-
Fi network.
INFO:
. Enabling the Wi-Fi hotspot functional-
ity of your device may incur additional
charges from your cellular provider.
Consult your cellular provider contract
regarding the communication fee.
. The data transfer may be limited
depending on the contents.
. Accessibility may be disabled depend-
ing on radio wave reception.
. When the automatic connection is
active on your device and the Network
Name (SSID) is already registered, turn-
ing [Vehicle Hotspot] on will automati-
cally connect the device to the vehicle.
. When using wireless Apple CarPlay® (if
so equipped), the Wi-Fi hotspot func-
tion cannot be used.
. The other wireless communication
may cause interference with the Wi-Fi
Hotspot function and a delay may
occur.
. When operating the device in the
vehicle, always obey the legal require-
ments in the state or province where
you are driving.
Displaying USB device information
AV1NJN1-0410F8D5-4D74-4C02-A786-2D75AB254FEC
The information of the connected USB
device can be viewed.
PBA0118X
Example
1. Push <MENU> and touch
[Connections].
2. Touch [USB].
3. Touch the name of the device you
wish to check. The name and the type
of the device are displayed.
2. Getting started
Condition:
2-19