Installation & Assembly

S348
ASSEMBLY INSTRUCTIONS:
1. Unpack all parts and place them on a level surface.
2. Align column (G) with base (H).
3. Thread column (G) onto base (H). Pull cord taut from below base
(G) to prevent damage to the wire.
4. Thread column (F) onto column (G). Pull cord taut from below
base (H) to prevent damage to the wire.
5. Thread column (E) onto column (F). Pull cord taut from below
base (H) to prevent damage to the wire.
6. Remove nial (A) from harp (C).
7. Squeeze harp (C) inward and place into the opening of saddle
(D).
8. Place shade (B) onto harp (C).
9. Screw nial (A) onto harp (C) to secure shade to lamp.
10. Install one 150W MAX. Type A bulb into socket.
11. Insert polarized plug (H) into wall outlet.
* To clean, use a soft cloth only. Do not use any chemical or
abrasive cleaners. *
SAFETY INSTRUCTIONS:
* This lamp comes with a polarized plug as a feature to reduce the
risk of electrical shock. If the plug does not t into your outlet,
contact a licensed electrician.
* NEVER alter the plug.
* Remove plug from wall outlet before replacing light bulb.
* Do not connect the electricity until lamp is fully assembled.
ASSEMBLY INSTRUCTIONS FOR YOUR
BANDIT FLOOR LAMP
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)