Installation & Assembly
DEXTER FLOOR LAMP
ASSEMBLY INSTRUCTIONS FOR YOUR
206
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully
assembled.
1. Unpack all parts and remove packing materials.
2. Pulling cord from below base (H) to avoid damage to cord,
thread column (G) onto base (H).
2. Remove nial (A) from shade riser (C). Thread shade riser
(C) onto socket housing (D).
3. Place shade (B) onto shade riser (C).
4. Thread nial (A) back onto shade riser (C) to secure
placement of shade.
5. Insert two 100W Max. Type A, medium base bulbs into the
sockets (E).
6. Insert polarized plug (I) into wall outlet.
7. Use pull chains (F) to control power to the lamp.
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the
other) as a feature to reduce the risk of electric shock. This
plug will t in a polarized outlet only one way. If it does not
t fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the
lamp can be fully inserted into the extension cord receptacle.
* Switch power o and remove plug from the wall outlet
before replacing the bulb.
* This lamp is UL rated for dry locations.
** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)