Installation & Assembly
476
ASSEMBLY INSTRUCTIONS FOR YOUR
ATOMIC FLOOR LAMP
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully
assembled.
1. Unpack all parts and remove packing materials.
2. Remove nial (A) from harp (C). Squeeze harp (C)
inward and place into the opening of saddle (D).
3. Place shade (B) onto harp (C). Thread nial (A) back onto
the harp to secure the shade to the lamp.
4. Insert one 150W Max. Type A, medium base bulb into the
socket.
5. Remove plastic from plug (E)
6. Insert polarized plug (E) into wall outlet.
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the
other) as a feature to reduce the risk of electric shock. This
plug will t in a polarized outlet only one way. If it does
not t fully in the outlet, reverse the plug. If it still does
not t, contact a qualied electrician. Do NOT alter the
plug.
* Do not use with an extension cord unless the plug from the
lamp can be fully inserted into the extension cord
receptical.
* Switch power o and remove plug from the wall outlet
before replacing the bulb.
* Do not connect electricity until lamp is fully assembled.
* This lamp is UL rated for dry locations.
** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **
(A)
(B)
(C)
(D)
(E)