Installation Guide
ASSEMBLY INSTRUCTIONS FOR YOUR
KOLEMAN FLOOR LAMP
461
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully
assembled.
1. Remove lamp parts from packaging. Do not throw away
any parts.
2. Place lamp base on level surface.
3. Carefully slide shade (B) onto socket (A).
4. Install one 60W Max. B11 torpedo, medium base bulb
into socket (A).
5. Remove protective plastic (G) from polarized plug (F).
Insert polarized plug (F) into wall outlet.
6. To adjust height of lamp loosen turn knob (E). Carefully
slide arm (D) into desired position. Tighten knob (E) to
secure position of arm (D).
7. Use switch (C) to control power to lamp.
* To clean, use a soft cloth only. Do not use any chemical
or abrasive cleaners.*
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than
the other) as a feature to reduce the risk of electric shock.
This plug will t in a polarized outlet only one way. If it
does not t fully in the outlet, reverse the plug. If it still
does not t, contact a qualied electrician. Do NOT alter
the plug.
* Do not use with an extension cord unless the plug from
the lamp can be fully inserted into the extension cord
receptical.
* Switch power off and remove plug from the wall outlet
before replacing the bulb.
(A)
(B)
(C)
(D)
(E)
(F)
(G)