Installation Guide

ASSEMBLY INSTRUCTIONS FOR YOUR
2134
AXIS PENDANT
ASSEMBLY INSTRUCTIONS:
1. SHUT OFF THE MAIN ELECTRICAL SUPPLY AT FUSE BOX/ CIRCUIT
BREAKER.
2. Remove all parts from carton. Do not throw away any parts.
3. Remove mounting plate (B) from canopy (D) by removing canopy screws (E).
Set canopy screws (E) aside.
4. Afx mounting plate (B) to ceiling outlet box with mounting screws (C)
provided.
5. Measure desired drop for xture to hang and add/remove extension tubes (I) as
needed. Guide wiring through extension tubes before threading tubes together.
**TO ADD/REMOVE EXTENSIONS: (Un)Thread the threaded nipple of one
extension into/out of the threaded opening of the next extension. Make sure
electrical cord is pulled tight when threading extensions together to prevent
damage to the wiring.**
6. Guide wiring from top extension (I) through loop (H), quick link (G) and hang
straight (F), exiting canopy (D). Lift canopy (D) to ceiling outlet box.
7. Make proper electrical connections described in steps 8 - 10. A LICENSED
ELECTRICIAN IS RECOMMENDED.
8. Attach ground wire from xture (green or silver in color) to ground wire from
outlet box. Fasten wires together with wire nut (A) and tightly wrap connection
with electrical tape.
9. Attach hot wire from xture (black in color or smooth side of wire) to hot wire
from outlet box. Fasten wires together with wire nut (A) and tightly wrap
connection with electrical tape.
10. Attach neutral wire from xture (white in color or ribbed side of wire) to
neutral wire from outlet box. Fasten wires together with wire nut (A) and
tightly wrap connection with electrical tape.
11. Carefully push wire connections back into ceiling outlet box.
12. Place canopy (D) over mounting plate (B). Thread canopy screws (E) into
holes in canopy (D), and mounting plate (B) to secure xture to ceiling.
13. Thread shade (J) onto extension (I).
14. Install one (1) 60W MAX G16.5, candelabra base bulb into socket located
inside of shade (J).
15. Reconnect main electrical supply from the fuse box/ circuit breaker and test
the xture.
***To clean, use soft cloth only. Do not use any chemical or abrasive cleaners.***
IMPORTANT SAFETY INSTRUCTIONS:
* These instructions are provided for your safety. It is very important that they are
read completely before beginning the installation of your xture.
* WE STRONGLY RECOMMEND INSTALLATION BY A LICENSED
ELECTRICIAN.
* Turn off power at switch before replacing bulbs, making sure xture has had
sufcient time to cool down.
* DO NOT subject the xture to any shock while lit as shattering of bulbs may
result.
(G)
(H)
(I)
(I)
(B)
(A)
(C)
OUTLET BOX
(F)
(E)
(D)
(I)
(I)
(J)