Installation Guide
ASSEMBLY INSTRUCTIONS FOR YOUR
NIKOLE ACCENT TABLE LAMP
ASSEMBLY INSTRUCTIONS:
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as
a feature to reduce the risk of electric shock. This plug will t in a
polarized outlet only one way. If it does not t fully in the outlet,
reverse the plug. If it still does not t, contact a qualied electrician.
Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can
be fully inserted into the extension cord receptacle.
* Switch power o and remove plug from the wall outlet before
replacing the bulb.
* This xture is UL rated for dry locations.
195
(A)
(B)
(C)
(D)
NOTE: Do not connect electricity until lamp is fully assembled.
1. Place base frame (C) on a level surface.
2. Remove shade screws (B) from threaded holes in metal frame (C).
3. Align holes in shade (A) with holes in metal frame (C). Thread
screws (B) into threaded holes in metal frame (C) to secure shade
(A) to frame (C).
4. Install one (1) Type B, 60 watt maximum candelabra base bulb into
the socket.
5. Remove protective plastic from electrical plug (D).
6. Plug lamp into wall outlet. Control power to xture by rotating
the switch on cord.
** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **