Installation Guide

ASSEMBLY INSTRUCTIONS FOR YOUR

REAL SIMPLE SWING ARM FLOOR LAMP

ASSEMBLY INSTRUCTIONS:

NOTE: Do not connect electricity until lamp is fully assembled.

1. Unpack all parts and discard packing materials.

2. Place base (D) on a level surface.

3. Remove ﬂ ange (A) from socket (C).

4. Place shade (B) onto socket (C).

5. Thread ﬂ ange (A) back onto socket (C) to secure shade to lamp.

6. Install one 150W maximum bulb into socket (C).

7. Remove protective plastic from plug (E).

8. Insert plug (E) into wall outlet.

** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **

IMPORTANT SAFETY INSTRUCTIONS:

* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This

plug will ﬁ t in a polarized outlet only one way. If it does not ﬁ t fully in the outlet, reverse the plug. If it still does not ﬁ t,

contact a qualiﬁ ed electrician. Do NOT alter the plug.

* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptacle.

* Switch power off and remove plug from the wall outlet before replacing the bulb.

1835

(B)

(A)

(C)

(D)

(E)