Installation Guide
ASSEMBLY INSTRUCTIONS FOR YOUR
160
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully assembled.
1. Unpack all parts and remove packing materials.
2. Remove nial (A) from shade riser (C). Thread shade riser (C) onto socket housing (D).
3. Place shade (B) onto shade riser (C).
4. Thread nial (A) back onto shade riser (C) to secure placement of shade.
5. Insert two 150W Max. Type A, medium base bulbs into the sockets.
6. Remove plastic cover from polarized plug (F). Insert polarized plug into wall outlet.
7. Use pull chains (E) to control power to the lamp.
** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock. This
plug will t in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still does not t,
contact a qualied electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord receptacle.
* Switch power o and remove plug from the wall outlet before replacing the bulb.
* This lamp is UL rated for dry locations.
(A)
(B)
(C)
(D)
(E)
(F)
FLORENCE TABLE LAMP