Installation Guide
ASSEMBLY INSTRUCTIONS FOR YOUR
158
ASSEMBLY INSTRUCTIONS:
NOTE: Do not connect electricity until lamp is fully
assembled.
1. Unpack all parts and remove packing materials.
Place lamp base on level surface.
2. Remove threaded base (B) from nial (A). Insert
threaded base (B) through the bottom of shade
washer (C). Thread nial (A) back onto threaded
base (B) until hand tight, securing it to shade (D).
3. Remove ange (E) from socket (F).
4. Place shade (D) onto socket (F). Thread ange (E)
back onto the socket to secure the shade to the lamp.
5. Install one 60W max. Type A, medium base bulb into
the socket (F).
6. Remove plastic cover from plug (G).
7. Insert plug (G) into wall outlet. Operate power by
rotating switch on the cord.
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider
than the other) as a feature to reduce the risk of
electric shock. This plug will t in a polarized outlet
only one way. If it does not t fully in the outlet,
reverse the plug. If it still does not t, contact a
qualied electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug
from the lamp can be fully inserted into the extension
cord receptacle.
* Switch power o and remove plug from the wall
outlet before replacing the bulb.
* This lamp is UL rated for dry locations.
(A)
(B)
(C)
(D)
(E)
(F)
(G)
**To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **
FLORENCE ACCENT LAMP