Installation Guide
ASSEMBLY INSTRUCTIONS FOR YOUR
ENTERPRISE TABLE LAMP
ASSEMBLY INSTRUCTIONS:
IMPORTANT SAFETY INSTRUCTIONS:
* This lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric shock.
This plug will t in a polarized outlet only one way. If it does not t fully in the outlet, reverse the plug. If it still
does not t, contact a qualied electrician. Do NOT alter the plug.
* Do not use with an extension cord unless the plug from the lamp can be fully inserted into the extension cord
receptacle.
* Switch power off and remove plug from the wall outlet before replacing the bulb.
1549
(B)
(C)
(D)
(E)
(F)
(G)
(A)
NOTE: Do not connect electricity until lamp is fully assembled.
1. Unpack all parts and remove packing materials. Place lamp base on level surface.
2. Remove ange (E) and washer (D) from shade housing (A)
2. Align opening in top of shade (C) with shade housing (A).
3. Place plastic washer (D) onto ange (E). Slip ange (E) through opening in shade (C) and thread it into shade
housing (A). Turn until hand tight.
4. Insert 1-100W Max. Type A, medium base bulb into the socket.
5. Remove protective plastic from plug (G).
6. Insert plug (G) into wall outlet.
7. To control power to the lamp, use switch (F).
** To clean, use a soft cloth only. Do not use any chemical or abrasive cleaners. **