Installation Guide

4
© 2017 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Installation instructions
Part no. 209-1277-rB rev. 09/25/17
Vitality Rectangular / Square
STEP 1 - ELECTRICAL CONNECTION
Refer to the Dimmer recommendations on page 2.
1. The required outlet should be located as shown. (see gure 1)
2. Make electrical connections as shown. (see gure 2)
1
C
L
17-1/2"
(445 mm)
Outlet
Location
2
*Make proper connections according to the Dimmer’s Manufacturer Instructions. For on/off
(no dimmer) operation a standard wall switch may be substituted in place of the dimmer.
20A GFI Circuit
Black (L)
Black (L1)
Red (L2)
White (N)
White (N)
Ground (G)
Ground (G)
Dimmer*
Light circuit
connection
Defogger
circuit
connection
Switch
Note: Outlet "line" connection for
top and bottom receptacles must
be electrically isolated from each
other. Receptacles will be controlled
independently.