Specification Sheet

UPLIFTTM SCONCE LIGHT
Installation Notes
Install this product according to the installation guide.
Installation of sconce is dependent upon the cabinet
installation. For optimal lighting, line-up the center of
the shade with the center of the cabinet.
To protect lights from damage, make sure to install hinge clips
on Robern cabinets. This will insure that the cabinet door does
not open more than 110 degrees.
Page 2 of 2
1121013-4-
A
UPLIFTTM SCONCE LIGHT
Product Diagram
60
(152.4 cm)
10-1/2
(26.7 cm)
Center of
Opening for
Electical Box
Center of
Cabinet
Uplift Cabinet Width
UC3027 = 30 (76.2 cm)
UC3627 = 36 (91.4 cm)
UC4827 = 48 (121.9 cm)
60
(152.4 cm)
10-1/2
(26.7 cm)
MP Height
39-1/4 (99.7 cm)
M Series Cabinet Width
MP16XXXX = 16 (40.6 cm)
MP20XXXX = 20 (50.8 cm)
MP24XXXX = 24 (61 cm)
MT16XXXX = 16 (40.6 cm)
MT20XXXX = 20 (50.8 cm)
MT24XXXX = 24 (61 cm)
MT Height
29-1/4 (74.3 cm)
Cabinet Width + 10 (25.4 cm)
Cabinet Width + 10 (25.4 cm)
3
(7.6 cm)
22
(55.9 cm)
4
(10.2 cm)
7
(17.8 cm)