Installation Sheet
9
© 2017 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Installation or Assembly Instructions
Part no. 209-1292-rC rev. 07/13/18
Profiles Modular Light
STEP 4 - RECESS INSTALLATION FOR PL5.0 MODEL
1. Each xture adds 5" (127 mm) or 10" (254 mm) per pair to the overall rough-in width of a standard cabinet installation. Refer to the
cabinet instruction manual included with your M / PL / Proles to calculate overall sizes and wall openings for recessed combinations
(Fig. 1).
Note: Refer to Electrical Connections on pages 11-12 for Field wire locations.
2. The cabinets and lights are mounted into the rough opening using the top and bottom locations of each light xture (Fig. 2).
3. Pre-drill pilot holes at an angle using a 3/32" drill bit (Fig. 3).
4. Secure assembly in the pre-drilled locations with the supplied screws [203-1364] (Fig. 4).
A
A
B
A = 5" (127 mm)
B = add 10" (254 mm) to cabinet width
1 2
3 4