Installation Sheet

5
© 2017 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Installation or Assembly Instructions
Part no. 209-1292-rC rev. 07/13/18
Profiles Modular Light
STEP 1 - UNPACK AND DISASSEMBLE
Prepare your wire connection.
1. Remove the Front Lens from the Light Case and set aside in a safe place (Fig. 1).
2. Carefully pull out the LED Reector Array, disconnect and remove the Reector from the Light Case and set aside (Fig. 2).
3. Be sure to note the wire connection so they can be properly reconnected later.
2
1
2 3
4 5
1
1
2 3
4 5