Installation Sheet
4
© 2017 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376 www.robern.com
Installation or Assembly Instructions
Part no. 209-1292-rC rev. 07/13/18
Profiles Modular Light
Unpack the Light. Check the box thoroughly for all hardware and loose parts. Carefully inspect the xture for damage.
The Proles Modular Light uses a replaceable LED Reector Array.
DANGER: Risk of personal injury. To avoid possible electrical shock, the electricity must be turned off at the circuit
breaker or fuse box before attempting any installation procedure.
DANGER: Risk of personal injury. To avoid possible electrical shock, the light xture must be properly grounded.
CAUTION: Grounding instructions for permanently connected products: This product must be connected to a grounded,
metal permanent wiring system or an equipment-grounding conductor must be run with the circuit conductors and connected to the
equipment-grounding terminal or lead on the product. All wiring should be done by a qualied licensed electrician.
IMPORTANT: Power for the lights should be provided separately from the electricity to the cabinet so that when lights are turned off,
cabinet electricity remains on.
NOTE: Requires 120 VAC 15 amp circuit.
NOTE: Requires an approved compatible dimmer for installation (not included). Refer to the dimmer recommendation on page 2.
Observe all local electrical codes and building codes. Wire the light xtures in accordance with the electrical codes.
This xture is for indoor use only.
This light xture is ETL listed for damp locations and conforms to UL STD 1598; certied to CSA STD C22.2 No. 250.0.
This installation may require more than one person depending on your Light/Cabinet conguration.
NOTES
DANGER - RISK OF SHOCK -
DISCONNECT POWER BEFORE INSTALLATION
Model Numbers
P L 3.5 40 T L S C
76
D
Collection P = Proles
L = Light
3.5" / 89 mm
5" / 127 mm
30" / 762 mm
40” / 1001 mm
T = 3/4" / 19 mm
L = LED
76 = Chrome
77 = Polished Nickel
82 = Matte Gold
83 = Matte Black
S = Silver
D = Dimmable
C = Clear Lens
Frame Width
Width
Accent Color
Ballast Type
Category
Type of Lamp
Metal Frame Finish
Height
Lens
3 = 2700 Kelvin
4 = 4000 Kelvin
V = Variable (2700K-5600K)
Kelvin Color Temperature
4
MODEL NUMBERS
Use the chart below to learn how to read your Proles Modular Light Model number. This chart references the model number for a 3.5"
W x 40" H Modular Light with a chrome metal nish. Consult the Robern Price Book for a complete list of model numbers.