Installation Sheet

800.877.2376 www.robern.com

Installation or Assembly Instructions

Part no. 209-1292-rC rev. 07/13/18

Proﬁles Modular Light

STEP 5 - SURFACE MOUNT INSTALLATION

Note: Refer to Electrical Connections on page 11 for Field wire locations.

For surface mounted installations, refer to the instruction manual supplied with the cabinet.

Note: The side kits are attached to the outside of the Lights/cabinet conguration, which differ from the cabinet instruction manual as

shown in the gure below.

After completing cabinet and lighting assembly (see pages 6 and 7), attach the nishing side kit with the supplied Hex Head Screws

[203-1363] included in the light hardware bag, using a 5/16″ socket wrench.

Plug the exposed top and bottom holes using the plastic plugs [203-1181] included in the hardware bag.

To complete Surface Mount see cabinet instructions for Mounting Bar and Top Clips.

203-1181

203-1363