Specification Sheet
• Install this product according to the installation guide.
• A 2700K - 3200K bulb is recommended for task lighting.
• If you are installing this sconce as grooming light, we recommend
installing two sconces on either side of a mirror. Mount each sconce
a maximum of 20" (508 mm) from the center of the mirror.
• Install only with a standard UL Listed junction box measuring
2-3/8" x 3-1/2" x 2-3/4" deep.
• If installed with a Robern cabinet or mirror, the center of the
junction box should be located 2" (51 mm) above the center of the
cabinet or mirror (see Figure 1).
• If installed with a Robern M Series Cabinet the Sconces should be
installed with a center to center distance of at least the width of the
cabinet + 10" (254 mm) (see Figure 1).
• The proper height of the cabinet depends upon the height of the
user. Refer to the installation guide to determine the proper height
of the sconce.
Installation Notes
Main Line Wall Sconce
Page of
-rA
10-1/4"
(260 mm)
11-7/16"
(291 mm)
12-5/16"
(313 mm)
3-1/8
"
(79 mm)
2
"
(51 mm)
3-13/16"
(97 mm)
Front View Side View
Robern Inc N Wilson Ave Bristol PA
1
Junction Box
Cabinet width + 10"
(254 mm)
C
L
2" (51 mm)
above cabinet center