Specifications

9
4.5 Replacing graphic wheels
Install graphic wheels with the device switched off only.
Unplug from mains before!
The dual graphic wheel consists of two graphic wheels. Both wheels has to be changed at the same time.
To replace graphic wheels.
1. Disconnect the xture from mains and allow it to cool.
2. Remove the bottom plastic cover of the head by loosening the 4 quarter-turn fasteners on the cover.
3. Tilt up the dual graphic wheel.
4. Remove the spring graphic wheel - lock with an appro priate tool (e.g. small-bladed screwdriver) and remove
it.
5. Remove the rst original graphic wheel and insert the new one (glazy side towards the lamp, black side
toward the objective!). Insert the spring-gobo lock to secure it in the graphic wheel holder.
6. Use the same steps to change the second graphic wheel .
5. Put the bottom cover back before applying power.