Specifications

DMX protocol
(For fixtures produced after 25/08/2013 or updated with a software DSU_RobinMMXSpot_13081343.zip
(DSU_RobinMMXSpot_13081343.tar.bz2) or latter .
DSU RobinPointe_YYMMDDTT.zip -->YY=year, MM=month, DD= day.)
Mode/channel
160 - 191 Shutter open, Electronic strobing „ZAP” from slow to fast proportional
192 - 223 Random strobe-effect from slow to fast proportional
224 - 255 Shutter open, Full lamp power step
37
31
29
39
Dimmer intensity
37
31
29
39
Dimmer intensity
0 - 255 Dimmer intensity from 0% to 100% proportional
38 * * 40
Dimmer intensity - fine
0 - 255 Fine dimming proportional
** If some optic module (zoom, focus) has to move into anti-collision position before
inserting frost or gobo, set time will be applied to both movements.
E.g. Time = 5 sec. and the frost effect is to be inserted, but the zoom module has to move
E.g. Time = 5 sec. and the frost effect is to be inserted, but the zoom module has to move
into anti-collision position before, this movement will take 5 sec. and after that movement of
the frost module will také next 5 sec.
To avoid this time delay, move the zoom module to anti-collision position before inserting
the frost module.
Page 10