Specifications

38
12. Maintenance and cleaning
It is absolutely essential that the xture is kept clean and that dust, dirt and smoke-uid residues must not build
up on or within the xture. Otherwise, the xture‘s light-output will be signicantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the xture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning uid is recommended, under no circumstances
should alcohol or solvents be used!
DANGER !
Disconnect from the mains before starting any
maintenance work
The front objective lens will require weekly cleaning as smoke-uid tends to building up residues, reducing
the light-output very quickly. The cooling-fans should be cleaned monthly.
The interior of the xture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
Dichroic colour lters, CMY lamellas, gobo and graphic wheels and the internal lenses should be cleaned
monthly.
Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.
Important! Check the air lters periodically and clean before they become
clogged!
Clean 2 air lters placed in the xture´s covers and one in the xture base. Use a vacuum cleaner, compressed
air or you can wash them and put back dry.
After replacing the air lters, reset the elapsed time counter in the menu "Information" (Information--->Air Fil-
ters---> Elapsed Time).
Replacing the fuse.
Before replacing the fuse, unplug mains lead.
1) Remove the fuse holder on the rear panel of the base with a tting screwdriver from the housing
(anti-clockwise).
2) Remove the old fuse from the fuse holder.
3) Install the new fuse in the fuse holder (only the same type and rating).
4) Replace the fuseholder in the housing and x it.
13. ChangeLog
This section summarizes all types of changes in the user manual.
Version of the
manual
Date of issue Description of changes
2.0 22/01/2015
Added menu item Pan/Tilt acceleration into menu Personality
1.9 15/01/2014
Removed one fuse holder from rear panel of the xture base, added
PowerCon
1.8 13/8/2013 New DMX chart v.1.7 ( mode 4 added)
1.7 21/9/2012
Tab "Service", added new item Hardware Conguration
1.6 14/12/2011
Tab Personality,added new item:DMX Input
New DMX chart v. 1.5. Added switching Wired/Wireless DMX on Power/
Special functions channel (DMX range 10-19).
New description of wireless operation
1.5 28/11/2011
Tab Personality,added new items:CMY+CTO Curve
Tab Personality, removed item : CMY Correction
1.4 21/11/2011 New DMX chart v. 1.4. Added switching dimmer curves on Power/Special
functions channel (DMX range 40-49).
Tab Personality, added new items :CMY+CTO Curve
Dimmer Curve
Specications are subject to change without notice.
January 22, 2015