Specifications

31
CTO Lamella Error 1 (CTO Lamella Error 2)
The messages will appear after the reset of the CTO ag if the ag is not located in the default position.
Strobe 1 Error 1 (Strobe 1 Error 2 )
The messages will appear after the reset of the dimmer/strobe module if the strobe lamella 1 is not located in
the default position.
Strobe 2 Error 1 (Strobe 2 Error 2 )
The messages will appear after the reset of the dimmer/strobe module if the strobe lamella 2 is not located in
the default position.
Prism Error 1 (Prism Error 2 )
The messages will appear after the reset of the prism wheel if this wheel is not located in the default position.
Zoom Error 1 (Zoom Error 2 )
The messages will appear after the reset of the zoom module if the zoom lens is not located in the default
position.
Focus Error 1 (Focus Error 2 )
The messages will appear after the reset of the focus module if the focus lens is not located in the default.
Gobo Carousel 1 Error 1 (Gobo Carousel 1 Error 2 )
The messages will appear after the reset of the gobo carousel 1 if this wheel is not located in the default posi-
tion.
Gobo rotation 1 Error 1 (Gobo Rotation 1 Error 2 )
The messages will appear after the reset of the rotating gobo wheel 1 if the rotating gobos are not located in
the default positions.
Gobo Carousel 2 Error 1 (Gobo Carousel 2 Error 2 )
The messages will appear after the reset of the gobo carousel 2 if this wheel is not located in the default posi-
tion.
Gobo rotation 2 Error 1 (Gobo Rotation 2 Error 2 )
The messages will appear after the reset of the rotating gobo wheel 2 if the rotating gobos are not located in
the default positions.
Faulty battery
The battery on the display board is exhausted and should be replaced immediately.
Clean Air Filters
The message informs that the item "Elapsed Time" in the "Fixture Information" menu is at 0 value. Clean air
lters and reset this counter.
Lamp Fans Bad, Lamp Off
One of the blowers (Fan 1, Fan 2) over the lamp malfunctions and the lamp was switched off.
Front Fans Bad, Lmp. Pw. R.
One of the blowers (Fan 3, Fan 4) in the xture head malfunctions and the lamp power was reduced to
500W.
Gobo Fan Bad, Lamp Off
The small blower (Fan 5) over gobo wheels malfunctions and the lamp was switched off.
Base Fans Bad, Lamp Off
One of the fans (suction fan Fan7, blow Fan 8) in the xture base malfunctions and the lamp was switched
off.