Specifications

24
Blackout Settings - Use the menu if you need to close the light output under certain conditions which are
described below
Blackout DMC - Blackout during movement correction. Set this option On if you wish to close light
output during the time when the head goes to its correct position, which has been changed by an
external force.
Active Blackouts - Use this menu if you wish to close the light output during effect changes.
Pan/Tilt Moving - The menu item enables to close light output while the pan/tilt coordinates
are changing.
Colour Wheel Moving - The menu item enables to close light output while the colour wheel
is moving.
Gobo Wheel Moving - The menu item enables to close light output while the rot. gobo
wheel or the static gobo wheel is moving.
Timeout Blackout - If this function is On, the CMY ags go to the full position after
5 seconds after what the dimmer was closed in order to totally close light output of the xture
Init Effect Positions - Use the menu to set all effects to the desired positions at which they will stay after
switching the xture on without DMX signal connected.
Screen Settings - Use this menu to change the touch screen settings.
Display Intensity - The item allows to control the intensity of the screen (1-min., 10-max.).
Screen saver Delay - The item allows you to keep the screen on or to turn it off automatically after 1-10
minutes after last touch (or pressing any button on the control panel).
Touchscreen Lock - The item allows you to lock the screen after last touch (or pressing any button on the
control panel). The time delay can be set in range of 1-10 minutes.To unlock the screen, press the
[ENTER/Display On] button.
Recalibrate Touchscreen - The item starts calibration of the touchscreen. Follow the instructions on
the screen.
Display Orientation - The menu allows to change display orientation.
Normal - Standard display orientation if the xture is placed horizontally (e.g. on the ground).
Inverted - Inverted orientation (needed if the xture is hanging on the truss).
Auto - The option activates a gravitation sensor for automatic screen orientation.
Note: Auto option is set as default. You change the display orientation by touching the icon on the display,
an the option set in the "Display Orientation" menu is temporarily overriden.
Temperature unit - Use the menu item to change temperature unit from °C to °F.
Fan Mode - Use the menu to set the xture fans to max. power mode ("High") or to auto-control mode ("Auto").
The third mode ("Silent") allows to set desired noise of the xture fans and the adjusted noise level is kept dur-
ing xture operation. The " Fan Noise Level" menu serves for adjusting fans power from min. to max.
To switch the xture to the "Silent" mode can be also realized by DMX value from range of 241-255 on the
"power/Special functions channel".
Note: the light output near min. level of the fan noise is reduced.
Magenta Correction - You can choose betwen deep tone of the magenta colour lter (On) or pale tone of the
magenta colour lter (Off). This function inuenced the "Compatible" CMY curve only.
CMY + CTO Curve - You can select desired running of CMY+CTO ags:
Compatible -compatible with previous versions of the Robin MMX Spot.
S-curve - improved distribution of the colour during colour ags movement.
After selecting desired curve, the "Magenta Correction" screen will appear, where you can choose between
deep tone of the magenta colour (On) or pale tone of the magenta colour (Off).
Note: If you entered S-Curve, all ags except magenta and CTO are open , magenta is full and the level of the
magenta tone can set by means of the item CTO Level.
Dimmer Curve - You can select desired running of dimmer lamellas : Compatible or SYNC (linear).
Date & Time Settings - Use this menu to set current date and time for the xture log system (menu "View
Logs"). Set this menu item before rst xture operation.