Specifications

6. Control menu

The Robin Actor 3 ST is equipped with 2-line LCD display which allows to set the xture´s behaviour accord-

ing to your needs, obtain information on its operation, test its various parts and lastly program it, if it has to be

used in a stand-alone mode.

Control panel:

[ESCAPE] button used to leave the menu without saving changes.

[NEXT] , [PREV] buttons for moving between menu items and for value adjusting.

[ENTER] button used to enter the selected menu (menu item) and to conrm adjusted value.

After switching the xture on, display shows current DMX address.

QUICK ACCESSIBLE ITEMS (DMXA, Zoom, Vir C, Dimm)

6.1 Addressing (DMXA)

Set DMXA- Use this menu item to set the DMX start address of the xture, which is dened as the rst channel

from which the Robin Actor 3 ST will respond to the controller.

If you set, for example, the address 36, the Robin Actor 6 will use channels 36 - 67 for control (if Mode 1 is

selected).

Please, be sure that you do not have any overlapping channels in order to control each Robin Actor 3 ST cor-

rectly and independently from any other xture on the DMX data link.

If there is no data received at the DMX input, the display will start to ash "0001” with actually stored DMX

address.

6.2 Zoom (Zoom)

The motorized zoom with silent running allows zoom range of 8°-53° (1/2 beam).

6.3 Virtual colour wheel (Vir C)

The virtual colour wheel allows choosing of 237 pre-dened colours including whites 2700K, 3200K, 4200K,

5600K, 8000K ; rainbow effect and six zone-effects available.

6.4 Dimmer (Dimm)

The electronic dimmer allows ne dimming in range 0-100%.

STANDARD MENU (MENU)

6.5 Fixture information (Info)

Pon Time - Power on time. Select this menu to read the number of xture operation hours.

Total -

The item shows the total number of the operation hours since

the Robin Actor 3 ST

has been fabricated.

Reset -

The item shows the number of the operation hours that the

Robin Actor 3 ST

has been powered on since the counter was last reset.

Note: Press and hold the [ESCAPE]

button to turn the display