Specifications
32
Accessories
- Omega holder (No.99010420)................................2 pcs
Optional Accessories
- Flash cable RS232/DMX (No.13050624)
12. Maintenance and cleaning
It is absolutely essential that the xture is kept clean and that dust, dirt and smoke-uid residues must not build
up on or within the xture. Otherwise, the xture‘s light-output will be signicantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the xture to function reliably throughout its life.
A soft lint-free cloth moistened with any good glass cleaning uid (except front objective lens) is recommended,
under no circumstances should alcohol or solvents be used!
DANGER !
Disconnect from the mains before starting any
maintenance work
The front objective lens (plastic) will require monthly cleaning as smoke-uid tends to building up residues,
reducing the light-output very quickly. For its cleaning, use a dry clout or an air-jet only.Never use water or any
other cleaning uid. The cooling-fans should be cleaned monthly also.
The interior of the xture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
Dichroic colour lters, CMY lamellas, gobo wheels and the internal lenses should be cleaned monthly.
Remove dust and dirt from the fans and cooling vents using a soft brush and vacuum-cleaner.
Important! Check the air lters periodically and clean before they become
clogged!
Clean the air lters placed in the xture´s covers. Use a vacuum cleaner, compressed air or you can wash
them and put back dry.
After replacing the air lters, reset the elapsed time counter in the menu "Information" (Information--->Air Fil-
ters---> Elapsed Time).
13. ChangeLog
This section summarizes all types of changes in the user manual.
Version of the
manual
Date of issue Description of changes
1.4
24/09/2012 Chapter "Maintenace and cleaning", added notice: The front objective lens
(plastic) will require monthly cleaning as smoke-uid tends to building up
residues, reducing the light-output very quickly. For its cleaning, use a dry
clout or an air-jet only
Specications are subject to change without notice.
September 24, 2012