Specifications

23
Pan Err
This message will appear after the reset of the xture if the head´s magnetic-indexing circuit malfunctions (sen-
sor failed or magnet is missing) or the stepping motor is defective or its driving IC on the PCB. The head is not
located in the default position after the reset.
9. Technical Specications
Electrical
Power supply:.........................electronic auto-ranging
Input voltage range:............... supply 100-240V, 50-60Hz
Fuse:.......................................T 3.15A/250V ~
Power consumption *:...............200W@230V,I=0.89A, power factor=0.96 (WW+CW=full)
200W@208V,I=0.99A, power factor=0.96 (WW+CW=full)
200W@110V,I=1.9A, power factor=0.94 (WW+CW=full)
*Allow for a deviation of +/-10%
Optic
Light source: 12 Osram Ostar DL multichips
3 zones with individual colour control of each
Min LED life expectancy: 20.000 hours
Beam angle: 7°
LED zones
pre-dened zone effects
Zone effects in both directions with variable speed
Strobe
All LED zones together:
Strobe effect with variable speed (0.3 - 20Hz)
Random strobe pulse-effect with variable speed
Opening/closing pulse effect with variable speed
Independent strobe effect with variable speed (0.3 - 20Hz) at zone 2,3
Random strobe and random LED zone effect
Dimmer
Smooth dimmer from 0 - 100 %
Pan/Tilt
Max. pan movement range: 450°
Max. tilt movement range: 300° (280° reduced)
16 bit movement resolution
Automatic Pan/Tilt position correction
Remotely controllable speed of pan/tilt movement for easy programming
Movement control: tracking and vector
Pan movement 0° - 450° at max. speed: 1 sec.
Tilt movement 0° - 300° at max. speed: 0.5 sec.
Control
2-row LCD display & 4 buttons
Readout xture usage, receiving DMX values, temperatures, etc
Built-in analyzer for easy fault nding, error messages
Built-in demo sequences
Silent fans cooling,
Stand-alone operation
3 user editable programs, each up to 40 steps
Supported protocols: USITT DMX 512, RDM,