C ATA LO G U E 2 0 1 0 | 2 0 1 1
R O B E L I G H T I N G R O B E ROBE lighting is dedicated to providing the very best and most elegant lighting solutions for the professional entertainment, leisure and architectural industries. A well balanced mix of innovation, imagination and experience has led to the development of a wide range of well-engineered products appropriate to all sectors. Robe's products have set standards for others to follow and earned their own reputation for being reliable and robust.
M O V I N G H E A D S M O V I N G 4 H E A D S ROBIN® 600E Spot .................................. 6 ROBIN® 600E Beam ................................ 8 ROBIN® 600 LEDWash ........................... 10 ROBIN® 600E Wash ............................... 12 ROBIN® 300E Spot ................................ 14 ROBIN® 300E Beam .............................. 16 ROBIN® 300 LEDWash ........................... 18 ROBIN® 300E Wash ............................... 20 ROBIN® 300 Spot Classic .......................
Thermal • • Maximum ambient temperature: 45 °C (104 °F) Maximum surface temperature: 80 °C (176 °F) Rotating Gobos • • • • Outside diameter: 26.8 mm Image diameter: 22.0 mm Thickness: 1.1 mm (max.
Thermal • • Maximum ambient temperature: 45 °C (113 °F) Maximum surface temperature: 80 °C (176 °F) Control and Programming • • • • • • • • • • • • • • • • • • • Setting & Addressing: ROBE Navigation System 2 (RNS2) Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2 Control channels: 18, 20, 26 3 DMX protocol modes 3-editable programs, each up to 100 steps Stand-alone operation QVGA Robe touch screen with battery backup gravitation sensor for auto screen positioning operation memory service log with
Mechanical Specification • • • • Height: 444 mm (17.5 ") Width: 345 mm (13.6 ") Depth: 203 mm (8.0 ") Weight: 10,6 kg (23.
Thermal • • Maximum ambient temperature: 45 °C (113 °F) Maximum surface temperature: 80 °C (176 °F) Control and Programming • • • • • • • • • • • • • • • • Setting & Addressing: ROBE Navigation System 2 (RNS2) Protocol: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2 Control channels: 14, 16, 19 3 DMX protocol modes 3-editable programs, each up to 100 steps Stand-alone operation QVGA Robe touch screen with battery backup gravitation sensor or auto screen positioning operation memory service log with RTC Pan
Thermal • • Maximum ambient temperature: 45 °C (104 °F) Maximum surface temperature: 80 °C (176 °F) Rotating Gobos • • • • Outside diameter: 26.8 mm Image diameter: 22.0 mm Thickness: 1.1 mm (max.
Thermal • • Maximum ambient temperature: 45 °C (113 °F) Maximum surface temperature: 80 °C (176 °F) Rotating gobos • • • • Outside diameter: 26.8 mm Image diameter: 22 mm Thickness: 1.1 mm (max.
Mechanical Specification • • • • Height: 444 mm (17.5 ") Width: 343 mm (13.5 ") Depth: 203 mm (8.0 ") Weight: 9,8 kg (21.
Thermal • • Maximum ambient temperature: 45 °C (113 °F) Maximum surface temperature: 80 °C (176 °F) Control and Programming • • • • • • Setting & Addressing: ROBE Navigation System 2 (RNS2) Protocol: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2 Control channels: 15, 17, 20 3 DMX protocol modes 3-editable programs, each up to 100 steps Stand-alone operation Display • • • • • • • • • QVGA Robe touch screen with battery backup gravitation sensor for auto screen positioning operation memory service log wi
Rotating Gobos • • • • Outside diameter: 26.8 mm Image diameter: 22.0 mm Thickness: 1.1 mm (max.
Control and Programming • • • • • • • • • • • • • Setting & Addressing: 4-digit LED display & 4 control buttons Protocols: USITT DMX-512, RDM Control channels: 13, 15, 18 3 DMX protocol modes one editable program up to 50 steps Stand-alone operation, Master/slave operation Pan/Tilt resolution: 8 or 16bit Movement control: Tracking and vector Colour wheel positioning: 8 or 16bit Zoom: 8 or 16bit Dimmer: 8 or 16bit Built-in analyser for easy fault finding Data in/out: Locking 3-pin XLR Electromechanical Ef
Control and Programming • • • • • • • • • • • • • • • • Setting & Addressing: 4-digit LED display & 4 control buttons Protocols: USITT DMX-512, RDM Control channels: 13, 15, 20 3 DMX protocol modes one editable program up to 50 steps Stand-alone operation, Master/slave operation Pan/Tilt resolution: 8 or 16 bit Movement control: Tracking and vector Colour wheel positioning: 8 or 16bit Static gobo wheel positioning: 8 or 16bit Rotating gobos: 8 or 16bit Frost: 8 bit Focus: 8 or 16bit Dimmer: 8 or 16bit Bui
Thermal • • Maximum ambient temperature: 45 °C (113 °F) Maximum surface temperature: 60 °C (140 °F) Rotating Gobos • • • • Outside diameter: 26.8 mm Image diameter: 22.0 mm Thickness: 1.1 mm (max.
Thermal • • Maximum ambient temperature: 40 °C (104 °F) Maximum surface temperature: 80 °C (176 °F) Control and Programming • • • • • • • • • • • • • • • Setting & Addressing: ROBE Navigation System 2 (RNS2) Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2 Control channels: 14, 16, 19 3 DMX protocol modes 3-editable programs, each up to 100 steps Stand-alone operation Display: QVGA Robe touch screen with battery backup gravitation sensor for auto screen positioning operation memory service log wit
TM Gobos • • • • Outside diameter: 37.5 +0/-0.25 mm Image diameter: 31.5 mm Thickness: 1.1 mm up to 5 mm in rotating slots Material: High-temperature borofloat glass Prisms and Effects • Outside diameter: 47+0/-0.
TM Thermal • • Maximum ambient temperature (Ta): 40 °C (104 °F) Maximum surface temperature: 130 °C (266 °F) Control and Programming • • • • • • • • • • • • • • • • • • Protocol: USITT DMX-512, RDM support Control channels: 17, 21, 23, 24 and 30 DMX channels: 5 protocol modes Setting & Addressing: ROBE Navigation System (RNS) Built-in demo sequences Display: Blue/white LCD graphic Pan/Tilt resolution: 16bit Color wheel 1 positioning: 8 or 16bit Color wheel 2 positioning: 8 or 16bit Zoom: 8 or 16bit Dimm
TM Rotating Gobos • • • • Outside diameter: 37.5 mm Image diameter: 31.5 mm Thickness: 1.1 mm (max.
TM Thermal • • Maximum ambient temperature: 40 °C (104 °F) Maximum surface temperature: 135 °C (176 °F) Rotating Gobos • • • • Outside diameter: 37.5 mm Image diameter: 31.5 mm Thickness: 1.1 mm (max.
TM Gobos • • • • Outside diameter: 37.5+0/-0.25 mm Image diameter: 31.5 mm Thickness: 1.1 mm up to 5 mm in rotating slots Material: High-temperature borofloat glass Prisms and Effects • • Outside diameter: 47 +0/-0.
TM Gobos • • • • Outside diameter: 37.5+0/-0.25 mm Image diameter: 31.5 mm Thickness: 1.1 mm up to 5 mm in rotating slots Material: High-temeperature borofloat glass Prisms and Effects • • Outside diameter: 47+0/-0.
TM Thermal • • Maximum ambient temperature: 40 °C (104 °F) Maximum surface temperature: 135 °C (275 °F) Control and Programming • • • • • • • • • • • • • • • • • Protocol: USITT DMX-512, RDM support Control channels: 17, 21, 23, 24, 30 DMX channels: 5 protocol modes Built-in demo sequences Display: Blue/white LCD graphic Pan/Tilt resolution: 16bit Color wheel 1 positioning: 8 or 16bit Color wheel 2 positioning: 8 or 16bit Zoom: 8 or 16bit Dimmer: 8 or 16bit Controllable speed of fans Movement control:
TM Thermal • • Maximum ambient temperature: 40 °C (104 °F) Maximum surface temperature: 120 °C (248 °F) Control and Programming • • • • • • • • • • • • • • • Setting & Addressing: ROBE Navigation System (RNS) Protocol: USITT DMX-512, RDM support Control channels: 18, 20, 21 or 23 5 DMX protocol modes 3-editable programs, each up to 99 steps Stand-alone operation Display: Blue/white LCD graphic Pan/Tilt resolution: 16bit Movement control: Tracking and vector Beam shaper: 8 or 16bit Zoom: 8 or 16bit Mec
TM Rotating Gobos • • • • Outside diameter: 26.8 mm Image diameter: 22.0 mm Thickness: 1.1 mm (max.
TM Thermal • • Maximum ambient temperature: 40 °C (104 °F) Maximum surface temperature: 120 °C (248 °F) Control and Programming • • • • • • • • • • • • • • • • Setting & Addressing: ROBE Navigation System (RNS) Protocol: USITT DMX-512, RDM support Control channels: 18, 20, 21, 22, 23, 24 6 DMX protocol modes 3-editable programs, each up to 99 steps Stand-alone operation Display: Blue/white LCD graphic Pan/Tilt resolution: 16bit Movement control: Tracking and vector Colour wheel positioning: 8 or 16bit
TM Thermal • • Maximum ambient temperature: 40 °C (104 °F) Maximum surface temperature: 120 °C (248 °F) Rotating gobos • • • • Outside diameter: 26.8 mm Image diameter: 22.0 mm Thickness: 1.1 mm (max.
TM Thermal • • Maximum ambient temperature: 40 °C (104 °F) Maximum surface temperature: 80 °C (176 °F) Gobos • • • Outside diameter – dichroic and glass gobos: 26.8 mm Image diameter – dichroic gobos: 22.0 mm Thickness – dichroic gobos: 1.1 mm (high temperature borofloat or better glass); glass gobos: max.
TM Control and Programming • • • • • • • • • • • • • • • • Protocol: USITT DMX-512, RDM support Control channels: 18, 20, 22 or 24 DMX channels: 4 protocol modes Built-in demo sequences Display: 4-digit LED Pan/Tilt resolution: 16bit Colour wheel positioning: 8 or 16bit Rotating beam shaper indexing: 8 or 16bit Zoom: 8 or 16bit Dimmer: 8 or 16bit Movement control: Tracking or vector Built-in analyzer for easy fault finding Data in/out: Locking 3-pin XLR & 5-pin XLR Master/Slave operation Stand-alone oper
TM Control and Programming • • • • • • • • • • • • • • • Protocol: USITT DMX-512, RDM support Control channels: 16, 18, 19, 21 DMX channels: 4 protocol modes Master/Slave operation Stand-alone operation 3-editable programs, each up to 99 steps Built-in demo sequences Display: 4-digit LED display Pan/Tilt resolution: 16bit Colour wheel positioning: 8 or 16bit Zoom: 8 or 16bit Dimmer: 8 or 16bit Movement control: Tracking and vector Built-in analyzer for easy fault finding Data in/out: Locking 3-pin & 5-pi
TM Thermal • • Maximum ambient temperature (Ta): 40 °C (104 °F) Maximum surface temperature: 80 °C (176 °F) Gobos • • • • Outside diameter – dichroic and glass gobos: 26.8 mm Image diameter – dichroic gobos: 22.0 mm Thickness – dichroic gobos: 1.1 mm (high temperature borofloat or better glass) Glass gobos: max.
TM Thermal • • Maximum ambient temperature: 45 °C (113 °F) Maximum surface temperature: 70 °C (158 °F) Control and Programming • • • • • • • • • • • • • • Protocol: USITT DMX-512, RDM support Control channels: 16, 18 or 20 DMX channels: 4 protocol modes Built-in demo sequences Display: 4-digit LED display Pan/Tilt resolution: 16bit Colour wheel positioning: 8 or 16bit Dimmer: 8 or 16 bit Master/Slave operation Stand-alone operation 3-editable programs, each up to 99 steps Movement control: Tracking an
TM Thermal • • Maximum ambient temperature (Ta): 40 °C (104 °F) Maximum surface temperature: 80 °C (176 °F) Gobos • • • Metal gobos – outside diameter: 26.9 mm, aluminium, thickness: 0.5 mm Dichroic gobos – outside diameter: 26.8 mm, thickness: 1.1 mm, high temperature borofloat or better glass Glass gobos – outside diameter: 26.8 mm, max. thickness: 4 mm, high temperature borofloat or better glass Control and Programming • • • • • • • • • • • • • Protocol: USITT DMX-512, RDM support Max.
TM Gobos • • Outside diameter of glass gobos: 26.8 mm Thickness of glass gobos: 1.1 mm (high temperature borofloat or better glass); max.
TM The ClubWash 500 CT is a reduced version of ClubWash 600CT and features manual zoom 7 °–28 °; CMY colour mixing system; full range dimming and variable strobo effect. The ClubWash 500 CT is aimed at middle sized clubs and discotheques and various other types of installations. Source • • • • • Lamp: Compact high-ressure metal halide lamp Base: GX-9.
TM Gobos • Glass gobos, outside diameter: 26.8 mm; thickness: 1.
TM Control and Programming • • • • • • • • • • • Protocol: USITT DMX-512 Control channels: 14 or 16 Built-in demo sequences Display: 4-digit LED display Master/Slave operation Stand-alone operation 3-editable programs, each up to 99 steps Controllable speed of fans Movement control: Tracking and vector Built-in analyser for easy fault finding Data in/out: Locking 3-pin XLR Electromechanical Effects • • • • • • Colour wheel: 3 dichroic filters, 3200 K and 5600 K correction filters, UV filter + open CM
TM Thermal • • Maximum ambient temperature (Ta): 45 °C (113 °F) Maximum surface temperature: 80 °C (176 °F) Gobos • • • Gobo wheel: 10 static gobos including 2 replaceable slots + open, continuous rotation and gobo shake Metal gobos – outside diameter: 26.9 mm; image diameter: 22.5 mm; thickness: 0.15 mm, stainless steel Multicolor dichroic gobos – outside diameter: 26.8 mm; thickness: 1.
TM Thermal • • Maximum ambient temperature (Ta): 45 °C (113 °F) Maximum surface temperature: 80 °C (176 °F) Control and Programming • • • • • • • • • • • Protocol: USITT DMX-512 Control channels: 8 or 10 Built-in demo sequences Display: 4-digit LED display Master/Slave operation Stand-alone operation 3-editable programs, each up to 99 steps Controllable speed of fans Movement control: Tracking and vector Built-in analyser for easy fault finding Data in/out: Locking 3-pin XLR Electromechanical Effects
TM Gobos • • Glass gobos – outside diameter: 26.8 mm, thickness: 1.1 mm, max. thickness: 4 mm, high temperature borofloat or better glass Metal gobos – outside diameter: 26.9 mm, thickness: 0.
TM Gobos • Metal gobos – outside diameter: 22.5 mm, aluminium, thickness: 0.
S C A N N E R S S C A N N E R S 82 Scan 1200 XT TM ..................................... 84 Scan 575 XT TM ....................................... 86 Scan 250 XT TM ....................................... 88 ClubScan 250 CT TM ................................. 90 ClubRoller 250 CT TM ............................... 92 ClubScan 150 CT TM .................................
TM Rotating Gobos • • Outside diameter – metal gobos: 53.3 mm Outside diameter – dichroic gobo: 53.1 mm and glass gobo: 49.8 mm • Thickness – metal gobos: 0.15 mm (steinless steel) • Dichroic gobos: 1.1 mm (high temperature borofloat or better glass) • Glass gobos: max.
TM Gobos • • • • Outside diameter – metal gobos: 26.9 mm Outside diameter – dichroic and glass gobos: 26.8 mm Thickness – metal gobos: 0.15 mm (steinless steel) Thickness – dichroic gobos: 1.1 mm (high temperature borofloat or better glass); glass gobos: max.
TM Gobos • • • • Outside diameter – metal gobos: 26.9 mm Outside diameter – dichroic and glass gobos: 26.8 mm Thickness – metal gobos: 0.15 mm (steinless steel) Thickness – dichroic gobos: 1.1 mm (high temperature borofloat or better glass); glass gobos: max.
TM Gobos • • • 5 metal gobos, 4 dichroic gobos + open Metal gobos – outside diameter: 16 mm, thickness: 0.5 mm, aluminium, image diameter: 13 mm Multicolor dichroic gobos – outside diameter: 15.8 mm, thickness: 1.
TM Gobos • • • 5 metal gobos, 4 dichroic gobos + open Metal gobos – outside diameter: 16 mm, thickness: 0.5 mm, aluminium, image diameter: 13 mm Multicolor dichroic gobos – outside diameter: 15.8 mm, thickness: 1.
TM Control and Programming • • • • • • • • • Protocol: USITT DMX-512 Control channels: 6 Built-in demo sequences Display: 3-digit LED display Pan/Tilt resolution: 8-bit Data in/out: Locking 3-pin XLR 1-editable program up to 30 steps Master/Slave and Stand-alone operation Time trigger, audio trigger Electromechanical Effects • • • • • Colour wheel: 11 dichroic filters and UV effect filter and 3 multi-colour filters + open Static gobo wheel: 13 static gobos + open; possible shaking gobos and pulse effe
C H A N G E R S C O L O U R 96 C O L O U R C H A N G E R S ColorMix 575 AT TM .................................. 98 ColorMix 250 AT TM .................................100 ColorMix 240 AT TM .................................
TM Thermal • • Maximum ambient temperature: 40 °C (104 °F) Maximum surface temperature: 75 °C (167 °F) Control and Programming • • • • • • • • • • Protocol: USITT DMX-512, RDM support Control channels: 11, 14 Built-in demo sequences Display: 4-digit LED display Built-in microphone for music trigger Master/Slave operation Stand-alone operation 3 freely-programmable programs, up to 99 steps each Built-in analyzer for easy fault finding Data in/out: Locking 3-pin XLR Electromechanical Effects • • • • C
TM Thermal • • Maximum ambient temperature (Ta): 40 °C (104 °F) Maximum surface temperature: 75 °C (167 °F) Control and Programming • • • • • • • • • • Protocol: USITT DMX-512, RDM support Control channels: 11 or 10 Bilt-in demo sequences Display: 4-digit LED display Built-in microphone for music trigger Master/Slave operation Stand-alone operation 3 freely-programmable programs, up to 99 steps each Buit-in analyzer for easy fault finding Data in/out: Locking 3-pin XLR Electromechanical Effects • •
TM Thermal • • Maximum ambient temperature (Ta): 40 °C (104 °F) Maximum surface temperature: 75 °C (167 °F) Control and Programming • • • • • • • • • • Protocol: USITT DMX-512, RDM support Control channels: 11 or 8 Bilt-in demo sequences Display: 4-digit LED display Built-in microphone for music trigger Master/Slave operation Stand-alone operation 3 freely-programmable programs, up to 99 steps each Buit-in analyzer for easy fault finding Data in/out: Locking 3-pin XLR Electromechanical Effects • • C
E F F E C T S L I G H T I N G 104 L I G H T I N G E F F E C T S Dominator 1200 XT TM ............................
TM Control and Programming • • • Protocol: USITT DMX-512 Control channels: 12 Data in/out: Locking 3-pin XLR Electromechanical Effects • • • • • 6 mirrorheads with PAN & TILT 6 mirrorhead cylinders rotating in both directions Effect carousel 1: multicolour gobo, 6 different static gobos/colours Effect carousel 2: 3 different dichroic colour filters (magenta, cyan, yellow), rotating 3-facet prism Shutter: Black-out and dimming Rigging • The Dominator‘s center-piece is a 6-fold multi-scanner featuring
TECHNOLOGY DIGITAL 108 D I G I T A L T E C H N O L O G Y DigitalSpot 7000 DT TM ...........................110 DigitalSpot 3000 DT TM ...........................112 RMS - ROBE Media Server TM ..................114 Media Server Qube Control TM .................116 Media Fusion Software TM .......................118 Media Fusion Qube Control Software TM ....
TM Operation System • Linux OS Graphic Engine • • • • • • • • • • • • • • • • • • • 4 digital gobo layers for image and video control Graphic engine supports a combined total of more than 60.
TM Hardware • • • • • • • Operation System • Linux OS Graphic Engine • • • • • • • • • • • • • • • • • • • • ROBE’s DigitalSpot 3000 DT II is the first Digital Moving Light Projector worldwide combining a LED-based Wash Light with a Digital Moving Light Projector. The fixture emits 3.200 ANSI lumens from a single 230 W projection lamp with an awesome contrast ratio of 3.
TM • • • • • • • • • • • CMY Image and Video Colour Mixing and CTC (Colour Temperature Correction) 2 Effect Engines per Layer with more than one hundred effects Huge amount of Default Images/Videos Import of User Images or Videos Supported Image Formats: JPG, TGA, PNG, GIF, PCX, PNM, XPM and LBM (max.
TM Full control of Robe’s StageQube 324 LED panels is provided via the new Media Fusion Qube Control software running on Robe’s Media Server Qube Control PC. Media Server Qube Control supports VGA-IN, S-video and Composite input in combination with all the effects of MediaFusion Qube Control Software on board. The hardware specification includes an Intel Core 2 Duo processor, ASUS P5N32 motherboard, 150 GB hard disc, „ ASUS V N7950GX2 graphics card and a 19 LCD display.
TM Robe’s Media Fusion Software is video software which aimed at lighting designers wanting to incorporate video into their creative work. Media Fusion Software will run on numerous computers, ranging from inexpensive laptops to powerful servers. It plays many different video file formats, and processes them through a large number of effects. It can be used in several different show environments, e.g.
L E D S E R I E S L E D 120 S E R I E S CityFlex 48 TM .......................................122 CitySkape XtremeTM ..............................124 CitySource 96TM....................................126 CitySkape 48 TM.....................................128 REDWash 3•192 TM................................130 REDMix 3•192 TM...................................132 REDWash 2•36 TM ................................
TM • • • Strobe effect with variable speed Pre-programmed random strobe pulse-effects White colour balance adjusting Control and Programming • • • • • • • • Setting & Addressing: 4-digit LED display & four control buttons) Protocols: USITT DMX-512, RDM Control channels: 2, 3, 4, 8 4 DMX protocol modes Stand -alone and master/slave operation 3-editable programs, each up to 68 steps 3 user editable programs each up to 68 steps Data in/out: 1.
TM Connection • • DMX data IN/OUT: Locking 5-pin XLR Power: 1.
TM Connection • • • DMX data IN: 1.3 m long cabel with 5-pin Indoor XLR (male) DMX data OUT: 1.3 m long cabel with 5-pin Indoor XLR (female) Power: 1.
TM Connection • • • DMX data IN: 1.3 m long cabel with 5-pin Indoor XLR (male) DMX data OUT: 1.3 m long cabel with 5-pin Indoor XLR (female) Power: 1.
LED Series TM Strobe • • Strobe effect with variable speed (max. 20 flashes per second) Pre-programmed random strobe pulse-effects Dimmer • Smooth dimming from 0–100 % Connections • • • DMX data in/out: Locking 3-pin and 5-pin XLR AC power input: 1.
LED Series TM Electronics • • • • • • Control panel: 4-digit LED display with 4 buttons Control: USITT DMX 512 (RDM support) DMX protocol modes: 5 (4, 8, 19 or 20 control channels) Control options: DMX, Auto-trigger Operations modes: DMX, Stand-alone, Master/Slave Manual control of all effects via control panel Strobe • • Strobe effect with variable speed (max. 20 flashes per sec.
LED Series TM Colours • • • 16.7 million colours (24 bit) Pre-programmed colours & rainbow effect White balance pre-programmed via LED control panel Dimmer, Strobe • • Electronic dimmer for light output adjustment from 0 to 100 % High speed white or full colour strobe, flash rate 1–25 fps Thermal • • Maximum ambient temperture: 40 °C (104 °F) Maximum housing temperature: 65 °C (149 °F) Mechanical Specification • • • • „ Height: 418 mm (16.5 ) „ Width: 326 mm (12.8 ) „ Depth: 362 mm (14.
W A L L V I D E O L E D 136 L E D V I D E O W A L L StageQube 324 TM ..................................
LED Video Wall TM Mechanical Specification • • • • • • Dimensions: 800 x 800 x 120 mm (with diffusor: 800 x 800 x 180 mm) Robust metal framing Integrated mechanical connection system Connector panel secured with access cover Adaptors for rigging systems Inflammability: B1 Controlling • • • • Input source: VGA at max.
S P I N N E R S M E D I A 140 M E D I A S P I N N E R S MediaSpinner 50 AT TM ...........................142 StageBanner 50 AT TM ............................
TM Pan • • • • • Pan movement range 440 ° 16-bit movement resolution Automatic pan position correction Remotely controllable speed of pan movement for easy programming Movement control: Tracking and vector Rigging • • • • Standing directly on the floor Mounting horizontally with 2 Omega brackets 2 truss orientation Safety chain/cord attachment point Load Specification • • • • The MediaSpinner 50 AT has the same features as the StageBanner 50 AT and is enhanced with a panel for the connection of audi
TM Electronics • • • • • • • • • Adressing, special functions setting via control panel with 4-digit LED display Readout fixture usage, receiving DMX values, temperature, etc Built-in analyzer for easy fault finding, error messages Built-in demo sequences Silent cooling Master/Slave operation Stand-alone operation Digital serial input DMX-512 4 control channels Pan • • • • • Continous rotation 16-bit movement resolution Automatic pan position correction Remotely controllable speed of pan movement for
C O N T R O L L E R S C O N T R O L L E R S 146 Robe Universal Interface TM.....................148 RDM Communicator TM ...........................150 Cyber Control TM.....................................151 DMX Control 1536 TM ..............................152 DMX Control 1024 TM ..............................154 DMX Control 512 TM ................................156 DMX Control 480 TM ................................
TM DMX data in/out: Locking 5-pin XLR USB 2.0 (series B) Mechanical Specification • • • • • The Robe Universal Interface is a multi-functional tool box with 2 DMX ports and one USB port. This unit communicates with a PC or Laptop via USB. The Robe Universal Interface provides fixture software updates and with additional ROBE RDM-network software provides RDM (Remote Device Management) functionality. The DreamBox supports RDM – new control protocol featuring AutoPatch and Fixture Status Monitoring.
TM The RDM communicator is a tool box for remote setting of Robe and Anolis fixtures via DMX link. Its main purpose is to set fixture options (DMX address, DMX mode...etc) for Anolis non-display fixtures like ArcPad Xtreme, ArcPad 48 Integral but can be used with any Robe or Anolis fixtures which support RDM protocol.
Controllers TM • • • • • • • • • • • • • • • • • • Effect generator to create chase effects. Factory ready color, gobo, focus & effect presets Large moving light fixture library available Scene preview with “Go” button Solo feature allows scenes to track through or play solo Scenes can be combined and recorded as new scenes Scenes, shows, chases and presets can be assigned to the playbacks.
Controllers TM • • • • • • • • • • • 4 Large Rotary Wheels for Menu and Control 48 Multi function buttons 8 Faders x 4 Banks Joystick for PAN and TILT operation Desk Lamp socket – XLR connector 2x (3pin) + 2x (5pin) DMX Outputs 2x polarity switch per output Midi-In port, Midi-Out port Compact flash card drive PS/2 KEY BOARD input RCA Audio input Rigging • Thanks to two DMX 512 outputs, it is possible with this fixture to control up to 1024 DMX channels – or 48 lighting fixtures of up to 32 channels ea
Controllers TM • • • • • • • 1 Large rotary wheel for Menu and Control 8 Faders x 4 Banks 1 (3pin) DMX Output 1 Polarity switch MIDI-In port, MIDI-Out port RS-232 Port for PC interface RCA Audio Input for Chases Rigging • The DMX Control 512 offers control of up to 16 fixtures with a maximum of 32 channels each. The DMX Control 512 supports ROBE and all other popular lighting brands. A show of up to 1024 Scenes can be created consisting of Presets and Chases.
Controllers TM • • • • • • • • • • Parallel running 2 scenes, programs and records Continually adjustable Step time and Fade time Macro functions – Color and Gobo values can be assigned to the buttons User definable system default settings 2 encoder Wheels for smooth control of PAN and TILT movement Microphone music control facility Remote configuration, control and programming of projectors Security Code protection Desk Lamp socket 32 MB Multi Media Card – which allows saving recorded scenes, programs a
F O G A N D H A Z E F O G 160 A N D H A Z E FOG 1550 FT TM .....................................162 FOG 1000 FT TM .....................................163 FOG 850 FT TM .......................................164 LOW FOG 3000 FT TM .............................166 FAZE 1050 FT TM ....................................168 FAZE 800 FT TM ......................................169 HAZE 500FT PRO TM ...............................170 Haze 400 FT TM ......................................172 FOG Fluids TM ...
FOG 1550 FT™ ensures that only the purest, driest white fog is produced. The electronic fluid level sensor stops operation in low-fluid situations offering complete protection to the heavyduty and silent running pump and the 100% pure aluminum cast heater. FOG 1550 FT™ is the perfect solution for productions needing intensive effects. FOG 1550 FT™ also caters to the portability needs of the touring and rental markets with custom flightcases available for this fogger.
TM FOG 850 FT™, offers the latest portable smoke technology. An ideal machine for easy operation and very suitable for smaller venues, mobile DJs, etc. The FOG 850 FT™ features rock-steady continuous output whether controlled by wireless, timer or in standalone mode. It has a fast warm-up time of under 100 seconds and produces a steady, constant fog for as long as needed without any reheating time in between.
TM • • • • • • • • • • • • • Distinguishing itself from other products currently on the market, the FOG 3000 FT™ creates low fog straight from machine’s nozzle. This makes it far more efficient and convenient without any hassles of CO2 installations and other attachments. It is operator-friendly as there are no external controls to the machine. Simply plug the unit in, connect the 3M fog conducting hose (for remote dispersion) and operate it like a normal fog machine.
This versatile FAZE 1050 FT™ is the result of an evolution between a fog and a haze machine. The Faze 1050 FT™ has the best features of both technologies without any compromises. The FAZE emits a fine, dry haze effect which is a perfect compliment for lighting. It is equipped with a range of sophisticated features which include a high precision PCB design; aluminum cast heater, a silent heavy-duty pump and controllable twin fans. Precise fan control is achieved by 3 adjustable levels via onboard DMX.
TM ROBE proudly unveils its latest Hazer - the HAZE 500 FT PRO™ - to the entertainment industry with great enthusiasm. This groundbreaking product is the result of extensive R‘ n‘ D in the field of haze machines, and has been developed following many years of experience and hard work. The performance of HAZE 500FT PRO™ is therefore second to none. It works spectacularly with laser beams and lighting effects to bring the best atmospheres to all events.
The Haze 400 FT™ has an internal, maintenance-free air compressor, a sophisticated haze transfer mechanism and a specially designed liquid tank, together with two haze nozzles. It is capable of producing large volumes of virtually invisible haze. The fine translucence and staying power of the haze is even more remarkable because this hazer has no temperature controls, hot air or warm-up times during operation. Its extremely powerful internal compressor is quiet and very efficient.
T O O L S L I G H T I N G 174 L I G H T I N G T O O L S Single Top Loader Case ROBIN 300 TM .........176 Dual Top Loader Case ROBIN 300 TM ...........177 Single Touring Case DS7000 TM ...................178 Single Touring Case DS3000T TM..................179 Dual Touring Case DS3000 TM ......................180 Lid Set DS3000 TM ......................................181 Dual Touring Case 2500 TM ..........................182 Lid Set 2500 TM ..........................................
Dual Top Loader Case ROBIN 300 This case provides perfect protection for Robin´s in the touring and rental market. It is constructed from high-quality, water repellent 13mm thick plywood. It has a black finish exterior and features aluminium protected edges and tough steel corners. This single case is equipped with four metal recessed wheels for easy transport. This Dual Touring Case provides full protection for Robin´s. It was built to endure the rigors of the touring and rental market.
This robust Touring Case is desinged for the safe transportation of the Robe DigitalSpot 7000 DT. It is constructed from high-quality, water repellent 13mm thick plywood. It features strong metal handles, hardwearing butterfly style latches and heavy duty wheels mounted on the reinforced base for easy transport. It has a black finish exterior and features aluminium protected edges and tough steel corners. This case provides perfect protection for Robe´s DigitalSpot 3000 DT in the touring and rental market.
Lid Set DS3000 TM TM This Dual Touring Case provides full protection for two Robe digital moving lights – the DigitalSpot 3000 DTs. It was built to endure the rigors of the touring and rental market. The case is manufactured from highquality, water repellent 13mm thick plywood. The features include durable construction, consisting of ball corners, strong metal handles and roller castors on the base to enable easy roll-on and roll-out.
Lid Set 2500 TM TM The Dual 2500 Touring Case provides full protection for the moving head of Robe´s 2500 AT series during transportation. It was designed to endure the rigors of the touring and rental market. The case is manufactured from high-quality, water repellent 13mm thick plywood. It has a black finished exterior and features aluminium protected edges and though steel corners. Roller castors enable easy transportation.
Lid Set 1200 TM TM The Dual 1200 Touring Case is perfect for transporting the moving heads of the Robe 1200 series. Features include four heavy duty wheels for easy transportation, aluminium edge protection and tough steel corners. This case is constructed from high-quality, water repellent 13mm thick plywood. It has a black finish exterior. The Lid Set 1200 allows you to separate a double 1200 Touring case into two single cases. It is constructed from high-quality, water repellent 13mm thick plywood.
Lid Set 700 TM TM This case has been designed to accomodate two 700 sized moving lights. It offers full protection to the lights during transportation. This robust Touring Case features four heavy duty wheels for easy transportation, reinforced carry handles, hardwearing butterfly style latches, tough steel corners and aluminium edge protection. It is manufactured from highquality, water repellent 13mm thick plywood. It has a black finish exterior.
Lid Set 575 TM TM The Dual 575 Touring Case provides full protection for the moving heads in the 575 series during transportation and touring. It was designed to endure the rigors of the touring and rental market. The case is manufactured from high-quality, water repellent 13mm thick plywood. It has a black finished exterior and features aluminium protected edges and tough steel corners. Roller castors on the base enable easy roll-on and roll-out.
This case has been designed to accomodate two 575 sized moving lights. The case is completely carpeted and foam lined. This robust Road case features reinforced carrrying handles, four heavy duty wheels mounted on the reinforced base for easy transport and hardwearing butterfly style latches. Inside there is a separate compartment for storing the mounting brackets. The Dual 575 Road Case is manufactured from high-quality, water repelent 9mm thick plywood.
TM The Quad 170 Touring Case was designed to accommodate four 170 sized moving yokes. This case offers complete protection for the units during transportation. It is manufactured from water repellent 9mm thick plywood and the exterior is covered in a black finish with aluminium edge protection and tough steel corners. Exterior dimensions • 192 „ „ „ 1075 x 845 x 570 mm (42.3 x 33.3 x 22.
TM Designed to house two Robe REDWash/Flash 3•192 fixtures, this quality case is made from high-quality, water repellent 13mm thick plywood. Features include four heavy duty wheels for easy transport, reinforced carry handles on all four sides, butterfly style latches, steel ball corners and aluminium edge protection. Its exterior is covered with a black finish. Exterior dimensions • 194 „ „ „ 1190 x 870 x 600 mm (46.9 x 34.3 x 23.
This case is designed to suit for four REDWash 2•36 moving lights. It provides full protection of the moving heads during touring and transportation. Features include aluminium edge protection and tough steel corners. It is equipped with roller castors on the base to enable easy roll-on and roll-out. This case is built from hight-quality water repellent 9mm thick plywood and the exterior is covered in a black finish.
Lighting Tools The Robe LightDome 1200 enables Robe 700/1200 AT Series fixtures to be used in outdoors installations in any type of weather. It is made from special transparent non-flamable PVC-P film, with an IP 43 protection factor. All the effects of the Robe fixture inside can be used as normal. Back-UPS holds the dome inflated for 8 minutes. It is to protect the plastic dome falling on the hot fixture.
TM The WeatherShield 1200 is made from Flame-retardant ABS and fits perfectly into the 1200AT/2500AT Series base. It is designed with slots for Omega holders and equipped with rubber shutters for perfect protection against the rain. Construction • Flame-retardant ABS Thermal • Maximum ambient temperature: 30 °C (86 °F) Dimensions „ • Height: 170 mm (6.7 ) „ • Width: 740 mm (29.1 ) „ • • 200 Depth: 690 mm (27.2 ) Weight: 2.5 kg (5.
A C C E S S O R I E S A C C E S S O R I E S 202 Standard glass holder ...................................212 Standard 25 ° beam angle module ..................212 Optional 45 ° beam angle module ...................212 Optional 45 ° x 15 ° beam angle module ..........212 Video Capture Card (DVI/VGA) .......................213 Video Capture Card (SDI/ASI) ........................213 Barn-doors (for CitySource 96) .......................214 Standard 25° beam angle module ...................
Barn-doors (black) Allows remote controlling of the fixture. • Suitable for ColorSpot 1200AT, ColorSpot 1200E AT Profile, ColorSpot 700E AT, ColorBeam 2500E AT, ColorWash 1200E AT, ColorBeam 700E AT, ColorWash 750AT Tungsten, ColorSpot 575E AT, ColorWash 575E AT, ColorWash 2500E AT Objective 12 ° Changes beam angle to 12 °. • Suitable for ColorSpot 250AT, ClubSpot 250CT, ClubSpot 300CT Objective 12 ° SCN Facilitates shaping the beam of light.
Changes beam angle to 87 °. Dense frost light filter. • Suitable for ColorMix 575AT • Suitable for REDBlinder 2•48, REDBlinder 2•96 Long Throw Optic (2.7–3.5:1) Frost module Lens Module for long distance projection Diffuser of light output changes the beam angle to 34 °/42 °/50 ° from standard 15 °/18 °/22 °. • Suitable for DigitalSpot 7000 DT • Suitable for ColorSpot 575AT, ColorSpot 575E AT Short Throw Optic (1.2–1.
Holds the gobos on a gobo wheel. Holds the gobos on a gobo wheel. • Suitable for ColorSpot 1200AT, ColorSpot 1200E AT, ColorSpot 2500E AT • Suitable for ColorSpot 575 AT, ColorSpot 575E AT, ColorSpot 250AT, ColorSpot 170AT Slot&Lock Gobo Holder 27 mm Slot&Lock Effect Gobo Holder 47 mm with magnet Holds the gobos on a gobo wheel. Holds the effect glasses on a effect wheel.
Top Hat 3-ring 45 Reducing passive light of fixture. For fixing the unit to the ceiling or wall. • Suitable for ClubScan 150CT, ClubScan 250CT, ClubRoller 150CT, ClubRoller 250CT Removable stand • Suitable for ColorWash 2500E AT, ColorWash 1200E AT, ColorWash 700E AT, ColorWash 750E AT Tungsten, ColorWash 575AT, , ColorWash 575AT Zoom, Robin 300E Wash, Robin 300 Plasma Wash, Robin 300 Wash Classic, Robin 600E Wash Top Hat 3-ring 70 Reducing passive light of fixture.
Video Capture Card (DVI/VGA) For additional frost folis. • Suitable for REDWash 3•192, REDMix 3•192 Standard 25 ° beam angle module Changes beam angle to 25 °. Capturing video input • Suitable for REDWash 3•192, REDMix 3•192 • Suitable for DigitalSpot 7000 DT, Digital 3000 DT II, Robe Media Server Optional 45 ° beam angle module Video Capture Card (SDI/ASI) Changes beam angle to 45 °.
Facilitates shaping the beam of light. • Suitable for CitySource 96 Standard 25° beam angle module Changes beam angle to 25° • Suitable for CitySource 96 Optional 45° beam angle module Facilitates shaping the beam of light.
Reducing passive light of fixture. • Suitable for CitySource 96 Half Top Hat Reducing passive light of fixture. • Suitable for CitySource 96 Top Hat Reducing passive light of fixture. • Suitable for CitySkape 48 Half Top Hat Reducing passive light of fixture. • Suitable for CitySkape 48 216 Barn-doors Facilitates shaping the beam of light. • Suitable for CitySkape Xtreme Frost glass 24 ° • Suitable for CitySkape Xtreme Top Hat Reducing passive light of fixture.
L A M P S L A M P S 218 MSD Gold™ 300/2 MiniFastFit ................220 MSR Gold™ 1500 FastFit .......................220 MSR Gold™ 575/2 MiniFastFit ................220 Lamp Hi-Brite 750 FastFit Philips ...........221 Lamp MSR Gold 700FastFit Philips .........221 Lamp MSR 575W/2 Philips ....................221 Lamp HSR 575W/72 Osram...................221 Lamp MSD Gold 300/2 MiniFastFit Philips..222 Lamp MSR Gold 1200 FastFitPhilips........222 Lamp MSR 1200 SA Philips ....................
Specifications • • • • • Wattage [W]: 300 Cap/base: PGJX28 Lumen Output [lm]: 22000 Color temperature [K]: 8800* Average lamp life [h]: 200 Lamp Hi-Brite 750 FastFit Philips Specifications • • • • • Wattage [W]: 780 Cap/base: PGJX 50 Lumen output [lm]: 22500 Colour temperature [K]: 3250 Average lamp life [h]: 300 * for electronic ballast, 8400 K for magnetic balllast Lamp MSR Gold 700 FastFit Philips MSR Gold™ 1500 FastFit Specifications • • • • • Wattage [W]: 700 Cap/base: PGJX 50 Lumen output [lm]:
Specifications • • • • • Wattage [W]: 300 Cap/base: PGJX 28 Lumen output [lm]: 22000 Colour temperature [K]: 8800 Average lamp life [h]: 2000 Lamp ELC/10H 24 V/250W Philips Specifications • • • • • Wattage [W]: 250 Cap/base: GX5.3 Lumen output [lm]: 14000 Colour temperature [K]: 3400 Average lamp life [h]: 1000 Lamp HMI 1200/GS Osram Lamp MSR Gold 1200 FastFit Philips Specifications • • • • • Wattage [W]: 1200 Cap/base: SFc15.
Specifications • • • • • Wattage [W]: 250 Cap/base: GY9.5 Lumen output [lm]: 18000 Colour temperature [K]: 8500 Average lamp life [h]: 3000 Lamp HSD 250W/80 Osram Specifications • • • • • Wattage [W]: 250 Cap/base: GY9.
C O N T A C T S D I S T R I B U T O R S HEAD OFFICE: FACTORY: ROBE lighting s. r. o. Rožnov p. R., Czech Republic Tel.: +420 571 751 500 Fax: +420 571 751 515 E-mail: robe@robe.cz www.robe.cz ROBE lighting s. r. o. Valašské Meziříčí, Czech Republic Tel.: +420 571 751 500 Fax: +420 571 626 515 E-mail: info@robe.cz www.robe.
C ATA LO G U E 2 0 1 0 | 2 0 1 1
