Specifications

REDMix3•192

8
3.4DMX512connection
Thefixtureisequipped withboth3‐pinand5‐pinXLRsocketsforDMXinputandoutput. Onlyuseashieldedtwisted‐
paircabledesignedforRS‐485and3‐pin/5‐pinXLR‐connectorsinordertoconnectthecontrollerwiththefixture
oronefixturewithanother.

WiringoftheXLRconnectors:
DMXoutputDMXinput
 XLRmountingsockets(rearview):    XLRmountingplugs(rearview):

   
1
– Shield
2
- Signal (-)
3
- Signal (+)
4
– Not connected
5
– Not connected
TobuildaDMXchain
1. ConnecttheDMXoutputofthecontrollerdirectlywiththeDMXinputofthefirstfixtureintheDMXchain.
2. ConnecttheDMXoutputofthefirstfixtureintheDMXchainwiththeDMXinputofthenextfixture.
3. Alwaysconnectthe
DMXoutputwiththeinputofthenextfixtureuntilallfixturesareconnected.
Donotoverloadthelink.Max.32fixturesmaybeconnectedonaDMXlink.


Caution:Terminatethelinkbyinstallingaterminationplugintheoutputofthelastfixture.Theterminationplugis
amale3‐pinXLRplugwitha120OhmresistorsolderedbetweenSignal(–)andSignal(+).

3.5Master/slaveconnection
Tobuildamaster/slave‐chain:
ConnecttheDMXoutputofthemasterfixtureinthedatachainwiththeDMXinputofthefirstslave.Always
connectoutputwiththeinputofthenextslaveuntilallslavesareconnected(upto32fixtures).





