Specifications

16
Optional Accessories
Set glass frost (No.99011539).................4 pieces
Set lm frost (No.99011540)....................4 pieces
9.Maintenance
Keep the Led Blinder 248 LT dry.
Operate only in places where the sufcient airow to cool the xture is present
Periodically clean the front transparent cover of LED modules
Use a moist, lint-free cloth. Never use alcohol or solvents!
In order to maintain adequate cooling,dust must be cleaned from the air vents.
Replacing the fuse
1.Before replacing the fuse, unplug mains lead!
2.Unscrew the fuse holder on the rear side of the REDBlinder 2•48 with a tting screwdriver from the housing
(anti-clockwise).
3.Remove the old fuse from the fuse holder.
4.Install the new fuse in the fuse holder.
5.Replace the fuse holder in the housing and x it.
Specications are subject to change without notice.