Specifications

next prog. step ,parameter "P.End" is increased about 1 automatically (except step 99).

5. Press Enter]-button to confirm adjusted value .

6. Press [Mode]-button,select next prog. step and repeat this procedure (steps 4 and 6).

The editting programs "PrG.1,PrG.2,PrG.3" are saved in the current modified fixture (master or slave1-9).

8.8.Reset function

Press [Enter] button to run a reset. This option enables the IMAGE SPOT 250 AT to index all effects (functions)

and return to their standard positions.

8.9.Special functions

Use the [Up] and [Down] buttons to browse through the special functions and select the one by pressing [Enter].

- Manual control of effects

The function allows you to control manually the channel functions of the fixture. Use the [Up] and [Down]

buttons to select desired function and press [Enter] to adjust the effect or [Mode] to cancel and return to the

menu.

- Lamp adjustment

This function can be used when you make the fine adjustment of the lamp.If you select "LAAd" pressing by

[Enter]-button ,all effects will be canceled,shutter will be opened and the dimmer intensity will be set onto 100%.By

using the options "PAn, tilt,Foc" you can focus the light on a flat surface (wall) and perform the fine lamp

adjustment.