Specifications

- Power On time

- By this option you can read the total number of the operation hours since the IMAGE

SPOT 250 AT has been fabricated. Press [Enter] or [Mode] to return to the menu.

- The number of the hours that the IMAGE SPOT 250 AT has been powered On since

the counter was last reset.Press [Enter] or [Mode] to return to the menu.In order to reset this

counter to 0, you have to hold the [Up] and [Down]-button and press the [Enter]-button.

- Lamp On time

- This option enables you to read the total number of the operation hours with the lamp

on since the IMAGE SPOT 250 AT has been fabricated.Press [Enter] or [Mode] to return to the

menu.

- The number of hours that the lamp has been powered On since the counter was last

reset.Press [Enter] or [Mode] to return to the menu. In order to reset this counter to 0, you have to

hold the [Up] and [Down]-button and press the [Enter]-button.

- Lamp strikes

- By this option you can read the total number of the lamp strikes since the IMAGE

SPOT 250 AT has been fabricated.Press [Enter] or [Mode] to return to the menu.

-The number of the lamp strikes since the counter was last reset.Press [Enter] or

[Mode] to return to the menu. In order to reset the counter to 0, you have to hold the [Up] and

[Down]-button and press the [Enter]-button.

- Max. fixture head temperature

- By this option you can read the max. temperature of the head inside since the IMAGE

SPOT 250 AT has been fabricated.Press [Enter] or [Mode] to return to the menu.

- Max. temperature of the head inside since the counter was last reset.Press [Enter] or

[Mode] to return to the menu. In order to reset the counter to 0, you have to hold the [Up] and

[Down]-button and press the [Enter]-button.

- Current fixture head temperature

Temperature readouts of the head inside in Celsius. Inside temperatures below 74° C are not critical. 74° C and

more lead to the lamp being switched off. Please note that the outside temperature should not exceed 45° C.

- DMX values

Readout DMX values of each channel received by the fixture. Use the [Up] and [Down] buttons to select desired

channel and press [Enter] to read its value coming to the fixture or [Mode] to cancel and return to the menu.