Specifications

12
Fixation via a mounting plate (mounting plate is not standard part of the fixture)
The fixture's base enables to be mounted in two ways using the special mounting plate :
1. Screw the 2 clamps to the included mounting plate with M12 bolts and nuts through the holes in the mounting
plate.
2. Insert the 4 quick-lock fasteners into the holes on the bottom of the base and tighten fully clockwise.
3. Fasten the safety-rope through the two apertures on the bottom of the base and over the trussing system.
Mounting plate
Safety rope
Clamp
Quick-lock
fasteners