Specifications
18
Temperatures:
-Maximum ambient temperature : 40° C
-Maximum housing temperature : 65° C
Minimum distances:
-Min.distance from ammable surfaces: 0,4m
-Min.distance to lighted object: 0,6m
Dimensions and weight:
- Weight: 7.5 kg
12. Maintenance and cleaning
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
It is absolutely essential that the xture is kept clean and that dust, dirt and smoke-uid residues must not build
up on or within the xture. Otherwise, the xture‘s light-output will be signicantly reduced. Regular cleaning will
not only ensure the maximum light-output, but will also allow the xture to function reliably throughout its life.
For cleaning plastic covers use a moist, lint-free cloth. Never use alcohol or solvents!
The front objective lens will require weekly cleaning as smoke-uid tends to building up residues, reducing the
light output very quickly.
To mantain adequate cooling,dust must be cleaned from the fan and air vents periodically.Remove dust from
the fan and air vents with a soft brush,vacuum-cleaner or compressed air.The gobo wheel may be cleaned
with a soft brush.
The cleaning period depends on the ambient operating conditions, but rst inspection of the xture interior
shoud be made after one month of its operating and according to these inspection results select suitable clean-
ing period.
There are no serviceable parts inside the device except for the lamp. Please refer to the instructions under
„Fitting/Exchanging the lamp“.
More complicated service operations should be carried out by authorized distributors.
Replacing the fuse
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuse holder on the rear panel with a tting screwdriver from the housing (anti-clock-
wise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and x it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
Specications are subject to change without notice.