Specifications

DigitalSpot 7000 DT

31.7 Replacing the fixture air filters

Important! Check the air filters periodically and clean before they become clogged!

Clean the air filters with a vacuum cleaner or you can wash them and put back dry.

Replacing air filters in the fixture head.

1. Disconnect the fixture from power.

2. Raise up the filter cover (fixed by two magnets) on the head cover.

3. Pull the air filter out.

4. Clean or replace the air filter.

5. Snap the filter cover back to the head cover.

6. Reset item "Time To Cleanup Filters" in the "Service menu

Replacing the air filter in the fixture base.

1. Disconnect the fixture from power.

2. Remove the side cover by loosening the 4 quarter-turn fasteners.

3. Pull the air filter out.

4. Clean or replace the air filter .

5. Put the side cover back.

6. Reset item "Time To Cleanup Filters" in the "Service menu".

We recommend avoiding dusty/smoky environments when operating the fixture. Usage in these environments may

cause a poor image quality. When using the fixture under dusty or smoky conditions,dust may accumulate on a

lens, liquid crystal panels, or optical elements inside the projector. Such condition may degrade the quality of the

projected image.

Magnets

Air filter

Filter cover

Head cover

Fans cover

Quarter

turn fasteners

Air filter