Specifications

DigitalSpot 7000 DT

31.5 Installing the SDI/ASI capture card

To install the optionsl SDI/ASI capture card.

1. Disconnect the fixture from power.

2. Remove both top covers (1) of the fixture base by

unscrewing 14 screws (2).

3. Remove the cover plate (6) of an unused slots for

SDI/ASI connectors on the rear panel of the fixture

by unscrewing the 2 screws (5) M3x6.

4. Unscrew six fastening screws (4) and carefully tilt

the rear panel from the chassis.

5. Remove the cover (7) of the SDI/ASI connectors holder (8)

by unscrewing the two screws M3x6 (9).