Specifications

DigitalSpot 7000 DT
89
LED Temperature Sensor 2 Short
The message informs you that there is not communication between the sensor measuring the temperature of the
LED module 2 and the control PCB. This connection is in short circuit.
Dataprojector Temp. Read Error
System message from dataprojector.
Dataprojector Power Failure
System message from dataprojector.
Dataprojector Abnormal Temperature
System message from dataprojector.
Dataprojector Lamp Failure
System message from dataprojector.
DMX Address Is Over Limit
The DMX start address is set to value that does not make possible receiving all DMX channels.
USB Communication Failure
The message signalizes problem with communication between PC motherboard and the motor driver board.
Network Communication Failure
The message signalizes problem with Ethernet interface on PC motherboard.
DP Filter Scroll Counter Warning
The message signalizes that Dataprojector Filter Scroll Counter comes at 0.