Specifications

DigitalSpot 7000 DT
47
255
Type of iris is changed after completing the open/close cycle
The Parameter 3 allows to choose iris opening/closing command:
DMX value
Function
0
Close iris
1
Open iris
2
Open and close iris at gobo change
3
Open iris at gobo change,
close iris at gobo change
A default value for all three parameters is 0.
20.6 Zoom effects on layer
Two zoom effects on each gobo layer can be applied on images if the Gobo Effect 1 Selection (or Gobo Effect 2
Selection) channel is set to a DMX value of 95 and 96. Both zoom effects can be activated by the Gobo Effect 1
Selection or Gobo Effect 2 Selection channel.
1. Zoom In/Move XY (DMX=95) – control of the effect is as follows:
Parameter 1 – zoom factor
Parameter 2 – movement in X-axis
Parameter 3 – movement in Y-axis
Example:
original picture after applying the effect
2. Zoom In/Auto Move XY (DMX=96) – control of the effect is following:
Parameter 1 – zoom factor
Parameter 2 –speed in X-axis
Parameter 3 – speed in Y-axis
20.7 Another graphic effects on layers
1. Swirl effect
Activation channel
Gobo Effect
2
Selection
(on each layer)
Default value
Activation DMX value
70
Control: Parameter 1
Radius
:
0
-
255
DMX
-
min.

max
0
Parameter 2
Angle
: 0
-
127DMX
-
turning by 360° to the right
128 DMX - no change
128