Specifications

DigitalSpot 7000 DT
24
Alphabetical Order --- The media files are assigned to DMX values in an alphabetical order.
Numerical projection --- The media files are assigned to DMX values in a numerical order.
Microphone Sensitivity --- Select this item to adjust the microphone sensitivity from 1 (maximum)
to 20 (minimum).
Verbose Mode --- Use this menu to hide messages displayed on the screen when you are changing some setting
on the Power/Special functions channel (e.g. Rear projection on, Rear projection off.....) .
Verbose Mode 0 --- Generated messages are hidden.
Verbose Mode I --- Generated messages are visible on the projection screen
DMX Verbose Mode --- It displayes information regards picture at the bottom left corner of
the image (channel, name, DMX value):
Synchro Verbose Mode --- used for debugging of video synchronization.
Default Settings --- Select this option to set default values or to remove user´s content in the fixture.
Set Default Values --- Select this option to reset all fixture personalities to the default values.
Remove User Media Content --- The item deletes all user media contents except the factory media
content.
15.4 Lamp On/Off
Use this option in order to switch on/off the projector´s lamp.Do not use the projector continuously for 24 hours or
more. If using the projector continuously for long periods, turn it off and leave it for one hour at least once during a
24 hour period.
15.5 Manual control
Manual DMX control ---Select this menu to control all channels by the control elements on the control board.
Video Input Selection ---This menu enables to select desired video input:
Internal input
External VGA Input
External SVIDEO Input
Data projector control --- Select this menu to operate the on-screen menu of the projector by means of the control
elements placed on the fixture control board.