Specifications

8
9
Fixation via the omega holders
1. Bolt each clamp (1) to the omega
holder (4) with M12 bolt and lock nut through the hole in the holder.
2. Fasten the omega holders on the
bottom of the base by inserting both quick-lock fasteners (3) into the holes of the base and tighten fully
clockwise.
3 . Fasten the safety-rope (2) through the
two apertures on the bottom of the base and over the trussing system.
1 - Clamp
2 - Safety-rope
3 - Quick-lock fastener
4 - Omega holder
Possible omega holder 4 positions:
Before taking into operation for the rst time,
the installation has to be approved by an expert!
1
2
3
4