Specifications

6
7
5. Powering on the DigitalSpot 5000 DT
To power on the xture,simply connect it to the AC mains supply (the power switch on the rear side of the
xture has to be in "On" position).
6. Shutting down the DigitalSpot 5000 DT
There are two recommended ways to shutdown the xture:
1.A DMX controller can switch off the projector lamp and shut down the fixture with the "Lamp Off,Fixture
Off" option on the control channel 8 (see DMX protocol).
2.The option "Fixture Off" in main menu of DigitalSpot 5000 DT switches off the projector lamp and shuts down
the xture.
Removing power directly without the shutdown procedure
can reduce xture reliability!
7. Folders organization
The DigitalSpot 5000 DT has a le system that holds the images and movies .These les are saved in a Media
folder.This folder contains subfolders (000,001...240) and valid les may go into those subfolders.
The images and video clips can be in one of the following formats: .bmp;.jpg; .tga; .png; .mpg1; .mpg2.
The folder named "Update" contains subfolders with the update les and names of subfolders are deducated
from date when software update has been executed.
Folders structure:
Top level folder
Media
000
001
002
:
240
Update
13-08-06_09:15:33
14-07-06_12:16:45
:
01-03-06_14:23:50
All the above-mentioned folders are shared.