Specifications
4
5
2.Operating determinations
If the device has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on
immediately. The arising condensation water might damage your device. Leave the device switched off until
it has reached room temperature.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture
or dust.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the x-
ture.
Always x the xture with an appropriate safety rope. Fix the safety rope at the correct holes only.
Only operate the xture after having checked that the housing is rmly closed and all screws are tightly fas-
tened.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualied for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modications on the device are forbidden due to safety reasons!
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
3. Introduction
The DigitalSpot 5000 DT features moving head with a video projection and automated lighting technologies
including a DMX controllable digital media server installed in a xture´s base. The built-in 32-bit Graphics En-
gine utilizes Linux and DirectX application programming interface to provide extensive image control of graphic
objects.
The Digital spot 5000 DT uses DMX512 protocol to control hardware functions like pan, tilt, and zoom, as well
as media xture capabilities including loading images and movies. The graphics engine allows you manipulate
position, scale, rotation, apply visual effects and color mix each image.
S-Video and VGA inputs for direct input to data projectors are handy for perfoming presentations.
S-Video and Composite live inputs can be used in graphics effects of DigitalSpot 5000DT
1 - Yoke
2 - Pan lock/unlock lever
3 - Front panel
4 - Moving head
5 - Tilt lock button (red)
6 - Tilt unlock button (green)
7 - Base
8 - Handle
4. Description of the device