Specifications

DigitalSpot 3000 DT II

26. Projection onto angular, cylindric or spheric surfaces

If a projection on curved surface is required a correction of the shape distortions is necessary. The DigitalSpot 3000

DT II supports projection onto angular screens, cylinders and spheres.

26.1 Curved surface support channels

Global effect 2

This channel enables you to select desired shape of the surface:

To simplify a correction process, there is a gobo with a net pattern (DMX value = 2) in a factory folder No. 20

(DMX value= 20) on a Gobo folder selection channel each gobo layer.

Global effect 2- parameter 1

This parameter enables to adjust the total length of the image edge. A value of 0 means no adjustment, a value of

255 means maximum correction.

Note. If a corner projection is selected on a Global effect 1 (values of 1-4), the red guiding line will appear in the

image (the gobo with the net pattern has to be projected).

Guiding line