Specifications

DigitalSpot 3000 DT II
45
20.5 Auto iris effect on layer
The effect behaves similar as Iris effect on layer, but it is auto- triggered by gobo changes.
The iris effect on layer can be activated on each gobo layer if you set the Gobo Effect 1 Selection channel to a DMX
value of 92.
The Parameter 1 of this effect changes the speed of the iris movement.
The Parameter 2 changes the iris mask type. The value of 254 and 255 activates random iris with the following
functions:
DMX value
Function
25
4
Every iris opening and closing is performed with different type of iris
255
Type of iris is changed after completing the open/close cycle
The Parameter 3 allows to choose iris opening/closing command:
DMX value
Function
0
Close iris
1
Open iris
2
Open and close iris at gobo change
3
Open iris at gobo change, close iris at gobo change
A default value for all three parameters is 0.
20.6 Zoom effects on layer
Two zoom effects on each gobo layer can be applied on images if the Gobo Effect 1 Selection (or Gobo Effect 2
Selection) channel is set to a DMX value of 95 and 96. Both zoom effects can be activated by the Gobo Effect 1
Selection or Gobo Effect 2 Selection channel.
1. Zoom In/Move XY (DMX=95) – control of the effect is as follows:
Parameter 1 – zoom factor
Parameter 2 – movement in X-axis
Parameter 3 – movement in Y-axis
Example:
original picture after applying the effect
2. Zoom In/Auto Move XY (DMX=96) – control of the effect is following:
Parameter 1 – zoom factor
Parameter 2 –speed in X-axis
Parameter 3 – speed in Y-axis