Specifications

CitySource 96 (RGBW)
23
To link the fixture with DMX transmitter.
The fixture can be only linked with the transmitter by running the link procedure at DMX transmitter .
After linking , the level of DMX signal ( 0-100 %) is displayed in the menu item “r.InF“ (SPEC-->rAdI.--> r.InF.)
To unlink the fixture from DMX transmitter.
The fixture can be unlinked from receiver via the menu item “ r.UnL.“ (SPEC-->rAdI.--> r.UnL.).
10. Technical specifications
Power supply
• Electronic auto-ranging
• Input voltage: 100 - 240V AC, 50-60 Hz
• Fuse: T3.15 A H
• Power consumption:
Power
mode
Max. power consumption
(All LED channels at full)
Typical power consumption
( 2 LED Channels at full)
Ambient
Temperature
Full mode
Eco mode
200W (225VA)
115W (140VA)
145W
100W
25°C
Optic & Effects
• Light source: 96 Luxeon Rebel LEDs (RGBW)
• Optical system: 12° standard lens-array, 25° egg-crate module included;
45°and 45°x15°eggcrate modules optionally available
• Fitting of additional frost foil filters
• RGBW colour mixing
• Built-in colour macros
• Adjustable strobe sequences
• White colour balance adjusting
•Lumen maintenance:
Channels @
full intensity
Power
mode
L
70
One LED
channel
Full mode
Eco mode
74,000
85,000
Two LED
channels
Full mode
Eco mode
70,000
80,000
Three LED
channels
Full mode
Eco mode
65,000
75,000
All LED
channels
Full mode
Eco mode
60,000
70,000
L
70
= 70% maintenance of initial lumen output in hours
Control
• 4-digit LED display and four control buttons
• USITT DMX 512 (RDM support)
• DMX protocol modes: 6 (2, 3, 4, 8, 12 control channels)
• Control: DMX 512, RDM support
• Operations modes: DMX, Stand-alone, Master/Slave
• Manual control of all effects via control panel
• 3 user editable programs each up to 68 steps