Specifications

16
230V/60Hz version:
1.Disconnect the fixture from AC power.
2.Remove the control board cover by loosening the 4 screws.
3.Move the wire 1 on the transformer connection block to the position according to the desired voltage.
4.Remove the front cover by loosening the 4 screws.
5.Move the wire 2 on the ballast connection block to the position according to the desired frequency
(voltage).
Example:
4.Put the covers back before applying AC power.
US version:
1.Disconnect the fixture from AC power.
2.Remove the front cover by loosening the 4 screws.
3.Move the wire 1 on the transformer connection block to the position according to the desired voltage.
4.Move the wire 2 on the ballast connection block to the position according to the desired frequency
(voltage).
Example:
4.Put the cover back before applying AC power.
Transformer
Ballast
Transformer
Ballast