Specifications

27
Fixture code
The option contains identification code (1-9999) for the fixture, which is used for the master/slave operation.
Adjusting the default positions of the colour and CMY
By this function you can calibrate and adjust the colour and CMY to their standard/right positions. Use the [Up]
and [Down] keys to browse through the adjusting menu - the display shows step by step these messages: "PAn,
Tilt,F.Pan,F.Tilt, SPEd, Func,Colo, CYAn, MAGE, YELL, MACr, EFFE, Stro, dimr, FCAL" by which you can
adjust the fixture to the required/desired position (0-255) before the function calibration. Then when the positioning
is finished use the last "FCAL" function (Fixture calibration).
1. Calibration via the control board
Press [Enter] and the [Up] and [Down] keys in order to display the following messages: "Colo, CYAn, MAGE,
YELL," for very smooth function calibration. Select one of them, press [Enter] and use the [Up] and [Down] keys
in order to adjust their right value from 0 to 255. Then press [Enter] to confirm or [Mode] to cancel and return to
the menu. This can be repeated for each calibration parameter if it is required. When the calibration is finished, it
is necessary to use the "ArES" function in order to write the calibration values to the memory (EPROM) and to
make a reset in order to check the newly adjusted positions of the colour and CMY wheels. When the reset of the
fixture is finished, the display will show the "FCAL" message. Press [Enter] to repeat the calibration or [Mode] to
return to the "AdJ" menu.
2. Calibration via the external controller
Press [Enter] and the [Up] and [Down] keys in order to display the following messages: "Colo, CYAn, MAGE,
YELL" - calibration parameters. Select one of them and press [Enter].
Now you can calibrate the colour and CMY wheels by your controller. The DMX calibration protocol is described
in the table mentioned below.
DMX Calibration protocol:
DMX chanel
Function
1
Colour
Calibration 0-255
2
Cyan
Calibration 0-255
3
Magenta
Calibration 0-255
4
Yellow
Calibration 0-255
5
No function
6
No function
7
Colours
8
Cyan
9
Magenta
10
Yellow
11
Speed CMY,dimmer
12
Colours macros
13
Beam effects
14
No function
15
Strobo
16
Dimmer
S
m
o
o
t
h
m
i
c
r
o
s
t
e
p
m
o
v
e
m
e
n
t
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol
Standard protocol